Zenode.ai Logo

TPS75518 Series

5-A, ultra-low-dropout voltage regulator with power good & enable

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

5-A, ultra-low-dropout voltage regulator with power good & enable

PartVoltage - Output (Min/Fixed)Operating Temperature [Max]Operating Temperature [Min]Number of RegulatorsControl FeaturesOutput ConfigurationCurrent - Quiescent (Iq)Package / CaseOutput TypeSupplier Device PackageProtection FeaturesMounting TypePSRRCurrent - OutputVoltage - Input (Max) [Max]
Texas Instruments
TPS75518KTTR
1.8 V
125 °C
-40 °C
1
Enable, Power Good
Positive
200 µA
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
27.03 °C/W
TO-263 (DDPAK-5)
Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Surface Mount
60 dB
5 A
5.5 V
Texas Instruments
TPS75518KC
1.8 V
125 °C
-40 °C
1
Enable, Power Good
Positive
200 µA
TO-220-5
27.03 °C/W
TO-220-5
Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Through Hole
60 dB
5 A
5.5 V
Texas Instruments
TPS75518KTTTG3
1.8 V
125 °C
-40 °C
1
Enable, Power Good
Positive
200 µA
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
27.03 °C/W
TO-263 (DDPAK-5)
Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Surface Mount
60 dB
5 A
5.5 V
Texas Instruments
TPS75518KTTT
1.8 V
125 °C
-40 °C
1
Enable, Power Good
Positive
200 µA
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
27.03 °C/W
TO-263 (DDPAK-5)
Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Surface Mount
60 dB
5 A
5.5 V

Key Features

5-A Low-Dropout Voltage RegulatorAvailable in 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed-Output and Adjustable VersionsOpen Drain Power-Good (PG\) Status Output (Fixed Options Only)Dropout Voltage Typically 250 mV at 5 A (TPS75533)Low 125 uA Typical Quiescent CurrentFast Transient Response3% Tolerance Over Specified Conditions for Fixed-Output VersionsAvailable in 5-Pin TO\x96220 and TO\x96263 Surface-Mount PackagesThermal Shutdown Protection5-A Low-Dropout Voltage RegulatorAvailable in 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed-Output and Adjustable VersionsOpen Drain Power-Good (PG\) Status Output (Fixed Options Only)Dropout Voltage Typically 250 mV at 5 A (TPS75533)Low 125 uA Typical Quiescent CurrentFast Transient Response3% Tolerance Over Specified Conditions for Fixed-Output VersionsAvailable in 5-Pin TO\x96220 and TO\x96263 Surface-Mount PackagesThermal Shutdown Protection

Description

AI
The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG\) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops down to less than 1 uA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 250 mV at an output current of 5 A for the TPS75533) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 uA over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems. The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to less than 1 uA at TJ= 25°C. The power-good terminal (PG\) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator. The TPS755xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS755xx family is available in a 5-pin TO\x96220 (KC) and TO\x96263 (KTT) packages. The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG\) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops down to less than 1 uA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 250 mV at an output current of 5 A for the TPS75533) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 uA over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems. The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to less than 1 uA at TJ= 25°C. The power-good terminal (PG\) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator. The TPS755xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS755xx family is available in a 5-pin TO\x96220 (KC) and TO\x96263 (KTT) packages.