TPS62823 Series
2.4-V to 5.5-V input, 3-A step-down converter with 1% accuracy in 1.5-mm x 2-mm VSON-HR package
Manufacturer: Texas Instruments
Catalog(3 parts)
| Part | Outputs and Type | Outputs and Type▲▼ | Voltage - Input▲▼ | Voltage - Input▲▼ | Main Purpose | Voltage - Output▲▼ | Board Type | Utilized IC / Part | Supplied Contents | Current - Output▲▼ | Voltage - Output (Max)▲▼ | Output Type | Frequency - Switching▲▼ | Topology | Number of Outputs▲▼ | Mounting Type | Function | Supplier Device Package | Voltage - Output (Min/Fixed)▲▼ | Voltage - Input (Min)▲▼ | Package / Case | Output Configuration | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Input (Max)▲▼ | Synchronous Rectifier▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS62823EVM-005TPS62823 DCS-Control™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board | Non-Isolated | 1 ul | 2.4000000953674316 V | 5.5 V | DC/DC, Step Down | 1.7999999523162842 V | Fully Populated | TPS62823 | Board(s) | 3 A | ||||||||||||||||
Texas Instruments TPS62823DLCRBuck Switching Regulator IC Positive Adjustable 0.6V 1 Output 3A 8-PowerVFDFN | 3 A | 4 V | Adjustable | 2200000 Hz | Buck | 1 ul | Surface Mount | Step-Down | 8-VSON-HR (2x1.5) | 0.6000000238418579 V | 2.4000000953674316 V | 8-PowerVFDFN | Positive | 125 °C | -40 °C | 5.5 V | ||||||||||
Texas Instruments TPS62823DLCTBuck Switching Regulator IC Positive Adjustable 0.6V 1 Output 3A 8-PowerVFDFN | 3 A | 4 V | Adjustable | 2200000 Hz | Buck | 1 ul | Surface Mount | Step-Down | 8-VSON-HR (2x1.5) | 0.6000000238418579 V | 2.4000000953674316 V | 8-PowerVFDFN | Positive | 125 °C | -40 °C | 5.5 V |
Key Features
• DCS-Control™ topology26-mΩ/25-mΩ internal power switches (TPS62823)Up to 3-A output current (TPS62823)Very low quiescent current of 4 µASwitching frequency of typically 2.2 MHz1% feedback voltage accuracy (full temp. range)Enable (EN) and power good (PG)Adjustable output voltage from 0.6 V to 4 V100% duty-cycle modeInternal soft-start circuitrySeamless power save mode transitionUndervoltage lockoutActive output dischargeCycle-by-cycle current limitHICCUP short-circuit protectionOver temperature protectionCISPR11 class B compliantCreate a custom design using the TPS62822 with theWEBENCH® Power DesignerDCS-Control™ topology26-mΩ/25-mΩ internal power switches (TPS62823)Up to 3-A output current (TPS62823)Very low quiescent current of 4 µASwitching frequency of typically 2.2 MHz1% feedback voltage accuracy (full temp. range)Enable (EN) and power good (PG)Adjustable output voltage from 0.6 V to 4 V100% duty-cycle modeInternal soft-start circuitrySeamless power save mode transitionUndervoltage lockoutActive output dischargeCycle-by-cycle current limitHICCUP short-circuit protectionOver temperature protectionCISPR11 class B compliantCreate a custom design using the TPS62822 with theWEBENCH® Power Designer
Description
AI
The TPS6282x is an all-purpose and easy to use synchronous step-down DC-DC converter with a very low quiescent current of only 4 µA. It supplies up to 3A output current (TPS62823) from a 2.4-V to 5.5-V input voltage. Based on the DCS-Control™ topology it provides a fast transient response.
The internal reference allows to regulate the output voltage down to 0.6 V with a high feedback voltage accuracy of 1% over the junction temperature range of -40°C to 125°C. The 1-A, 2-A, 3-A scalable pin-to-pin and BOM-to-BOM compatible device family can be used with small 470-nH inductors.
The TPS6282x include an automatically entered power save mode to maintain high efficiency down to very light loads.
The device features a Power Good signal and an internal soft start circuit. It is able to operate in 100% mode. For fault protection, it incorporates a HICCUP current limit as well as a thermal shutdown.
The TPS6282x are packaged in a 2 mm x 1.5 mm QFN-8 package.
The TPS6282x is an all-purpose and easy to use synchronous step-down DC-DC converter with a very low quiescent current of only 4 µA. It supplies up to 3A output current (TPS62823) from a 2.4-V to 5.5-V input voltage. Based on the DCS-Control™ topology it provides a fast transient response.
The internal reference allows to regulate the output voltage down to 0.6 V with a high feedback voltage accuracy of 1% over the junction temperature range of -40°C to 125°C. The 1-A, 2-A, 3-A scalable pin-to-pin and BOM-to-BOM compatible device family can be used with small 470-nH inductors.
The TPS6282x include an automatically entered power save mode to maintain high efficiency down to very light loads.
The device features a Power Good signal and an internal soft start circuit. It is able to operate in 100% mode. For fault protection, it incorporates a HICCUP current limit as well as a thermal shutdown.
The TPS6282x are packaged in a 2 mm x 1.5 mm QFN-8 package.