TPS62807 Series
1.75-V to 5.5-V input, 600-mA ultra-low IQ step-down converter in 0.7-mm x 1.05-mm WCSP
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Voltage - Input (Min)▲▼ | Voltage - Output (Max)▲▼ | Output Configuration | Voltage - Output (Min/Fixed)▲▼ | Voltage - Output (Min/Fixed)▲▼ | Topology | Mounting Type | Function | Number of Outputs▲▼ | Output Type | Voltage - Input (Max)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Supplier Device Package▲▼ | Supplier Device Package | Supplier Device Package▲▼ | Current - Output▲▼ | Package / Case | Synchronous Rectifier▲▼ | Frequency - Switching▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS62807YKARBuck Switching Regulator IC Positive Adjustable (Fixed) 0.8V (1.2V) 1 Output 600mA 6-XFBGA, DSBGA | 1.7999999523162842 V | 1.5499999523162842 V | Positive | 0.800000011920929 V | 1.2000000476837158 V | Buck | Surface Mount | Step-Down | 1 ul | Adjustable (Fixed) | 5.5 V | 125 °C | -40 °C | 0.699999988079071 ul | 6-DSBGA | 1.0499999523162842 ul | 0.6000000238418579 A | 6-XFBGA, DSBGA | 1500000 Hz | |
Texas Instruments TPS62807YKATBuck Switching Regulator IC Positive Adjustable (Fixed) 0.8V (1.2V) 1 Output 600mA 6-XFBGA, DSBGA | 1.7999999523162842 V | 1.5499999523162842 V | Positive | 0.800000011920929 V | 1.2000000476837158 V | Buck | Surface Mount | Step-Down | 1 ul | Adjustable (Fixed) | 5.5 V | 125 °C | -40 °C | 0.699999988079071 ul | 6-DSBGA | 1.0499999523162842 ul | 0.6000000238418579 A | 6-XFBGA, DSBGA | 1500000 Hz |
Key Features
• 1.75V to 5.5V input voltage range2.3µA operating quiescent currentUp to 4MHz switching frequency0.6A or 1A output current1% output voltage accuracySelectable power save and forced PWM modeR2D converter for flexible VOUT setting16 selectable and one fixed output voltagesTPS62800 (4MHz): 0.4V to 0.775VTPS62801 (4MHz): 0.8V to 1.55VTPS62802 (4MHz): 1.8V to 3.3VTPS62806 (1.5MHz): 0.4V to 0.775VTPS62807 (1.5MHz): 0.8V to 1.55VTPS62808 (1.5MHz): 1.8V to 3.3VSmart enable pinOptimized pinout to support 0201 componentsDCS-Control topologyOutput discharge100% duty cycle operationTiny 6-pin, 0.35mm pitch WCSP packageSupports < 0.6mm design heightSupports < 5mm2 design sizeCreate a custom design using the:TPS62800WEBENCH Power DesignerTPS62801WEBENCH Power DesignerTPS62802WEBENCH Power DesignerTPS62806WEBENCH Power DesignerTPS62807WEBENCH Power DesignerTPS62808WEBENCH Power Designer1.75V to 5.5V input voltage range2.3µA operating quiescent currentUp to 4MHz switching frequency0.6A or 1A output current1% output voltage accuracySelectable power save and forced PWM modeR2D converter for flexible VOUT setting16 selectable and one fixed output voltagesTPS62800 (4MHz): 0.4V to 0.775VTPS62801 (4MHz): 0.8V to 1.55VTPS62802 (4MHz): 1.8V to 3.3VTPS62806 (1.5MHz): 0.4V to 0.775VTPS62807 (1.5MHz): 0.8V to 1.55VTPS62808 (1.5MHz): 1.8V to 3.3VSmart enable pinOptimized pinout to support 0201 componentsDCS-Control topologyOutput discharge100% duty cycle operationTiny 6-pin, 0.35mm pitch WCSP packageSupports < 0.6mm design heightSupports < 5mm2 design sizeCreate a custom design using the:TPS62800WEBENCH Power DesignerTPS62801WEBENCH Power DesignerTPS62802WEBENCH Power DesignerTPS62806WEBENCH Power DesignerTPS62807WEBENCH Power DesignerTPS62808WEBENCH Power Designer
Description
AI
The TPS6280x device family is a step-down converter with 2.3µA typical quiescent current featuring the highest efficiency and smallest design size. TI’s DCS-Control topology enables the device to operate with tiny inductors and capacitors with a switching frequency up to 4MHz. At light load conditions, the device seamlessly enters power save mode to reduce switching cycles and maintain high efficiency.
Connecting the VSEL/MODE pin to GND selects a fixed output voltage. With only one external resistor connected to VSEL/MODE pin, 16 internally set output voltages can be selected. An integrated R2D (resistor-to-digital) converter reads out the external resistor and sets the output voltage. The same device part number can be used for different applications and voltage rails just by changing a single resistor. Furthermore, the internally set output voltage provides better accuracy compared to a traditional external resistor divider network. After the device has started up, the DC/DC converter enters forced PWM mode by applying a high level at the VSEL/MODE pin. In this operating mode, the device runs at a typical 4MHz or 1.5MHz switching frequency, enabling lowest output voltage ripple and highest efficiency. The TPS6280x device series comes in a tiny 6-pin WCSP package with 0.35mm pitch.
The TPS6280x device family is a step-down converter with 2.3µA typical quiescent current featuring the highest efficiency and smallest design size. TI’s DCS-Control topology enables the device to operate with tiny inductors and capacitors with a switching frequency up to 4MHz. At light load conditions, the device seamlessly enters power save mode to reduce switching cycles and maintain high efficiency.
Connecting the VSEL/MODE pin to GND selects a fixed output voltage. With only one external resistor connected to VSEL/MODE pin, 16 internally set output voltages can be selected. An integrated R2D (resistor-to-digital) converter reads out the external resistor and sets the output voltage. The same device part number can be used for different applications and voltage rails just by changing a single resistor. Furthermore, the internally set output voltage provides better accuracy compared to a traditional external resistor divider network. After the device has started up, the DC/DC converter enters forced PWM mode by applying a high level at the VSEL/MODE pin. In this operating mode, the device runs at a typical 4MHz or 1.5MHz switching frequency, enabling lowest output voltage ripple and highest efficiency. The TPS6280x device series comes in a tiny 6-pin WCSP package with 0.35mm pitch.