TPS22969 Series

5.5-V, 6-A, 4.4-mΩ load switch with output discharge

Catalog

5.5-V, 6-A, 4.4-mΩ load switch with output discharge

Part	Supplied Contents	Contents	Function	Utilized IC / Part	Type	Package / Case	Output Type	Package Length	Package Name	Package Width	Interface	Number of Outputs	Voltage - Supply (Vcc/Vdd) Minimum	Voltage - Supply (Vcc/Vdd) Maximum	Operating Temperature (Max)	Operating Temperature (Min)	Voltage - Load (Max)	Voltage - Load (Min)	Rds On (Typ)	Switch Type	Current - Output (Max)	Input Type	Features	Output Configuration	Mounting Type	Output Ratio	Input Ratio
Texas Instruments TPS22969EVM-079	Board(s)	Board	Power Distribution Switch (Load Switch)	TPS22969	Power Management
Texas Instruments TPS22969DNYR						8-WDFN Exposed Pad	N-Channel	3 mm	8-WSON	3 mm	On/Off	1	0.8 V	5.5 V	125 °C	-40 °C	5.5 V	2.5 V	4.4 mOhm	General Purpose	6 A	Non-Inverting	Load Discharge Slew Rate Controlled	High Side	Surface Mount	1	1
Texas Instruments TPS22969DNYT						8-WDFN Exposed Pad	N-Channel	3 mm	8-WSON	3 mm	On/Off	1	0.8 V	5.5 V	125 °C	-40 °C	5.5 V	2.5 V	4.4 mOhm	General Purpose	6 A	Non-Inverting	Load Discharge Slew Rate Controlled	High Side	Surface Mount	1	1

Catalog

5.5-V, 6-A, 4.4-mΩ load switch with output discharge

Description

The TPS22969 is a small, ultra-low RON, single channel load switch with controlled turn on. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8 V to 5.5 V and can support a maximum continuouscurrent of 6 A. The combination of ultra-low RONand high current capability of the device makes it ideal for driving processor rails with very tight voltage dropout tolerances. The controlled rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating voltage droop on the power supply. The switch can be independently controlled via the ON pin, which is capable of interfacing directly with low-voltage control signals originating from microcontrollers or low voltage discrete logic. The device further reduces the total solution size by integrating a 224-Ω pull-down resistor for quick output discharge (QOD) when the switch is turned off. The TPS22969 is available in a small 3.00 mm x 3.00 mm SON-8 package (DNY). The DNY package integrates a thermal pad which allows for high power dissipation in high current and high temperature applications. The device is characterized for operation over the free-air temperature range of –40°C to 105°C. The TPS22969 is a small, ultra-low RON, single channel load switch with controlled turn on. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8 V to 5.5 V and can support a maximum continuouscurrent of 6 A. The combination of ultra-low RONand high current capability of the device makes it ideal for driving processor rails with very tight voltage dropout tolerances. The controlled rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating voltage droop on the power supply. The switch can be independently controlled via the ON pin, which is capable of interfacing directly with low-voltage control signals originating from microcontrollers or low voltage discrete logic. The device further reduces the total solution size by integrating a 224-Ω pull-down resistor for quick output discharge (QOD) when the switch is turned off. The TPS22969 is available in a small 3.00 mm x 3.00 mm SON-8 package (DNY). The DNY package integrates a thermal pad which allows for high power dissipation in high current and high temperature applications. The device is characterized for operation over the free-air temperature range of –40°C to 105°C.