TPS62230 Series

2 MHz Ultra Small Step Down Converter with DCS-Control in 1x1.5 SON Package

Catalog(3 parts)

Part	Operating Temperature▲▼	Operating Temperature▲▼	Voltage - Output (Min/Fixed)▲▼	Package / Case	Number of Outputs▲▼	Voltage - Input (Min)▲▼	Function	Voltage - Input (Max)▲▼	Output Type▲▼	Mounting Type	Topology	Supplier Device Package▲▼	Supplier Device Package▲▼	Supplier Device Package	Current - Output▲▼	Output Configuration	Frequency - Switching▲▼	Outputs and Type	Outputs and Type▲▼	Supplied Contents	Voltage - Input▲▼	Voltage - Input▲▼	Main Purpose	Utilized IC / Part	Board Type
Texas Instruments TPS62230DRYT Buck Switching Regulator IC Positive Fixed 2.5V 1 Output 500mA 6-UFDFN	125 °C	-40 °C	2.5 V	6-UFDFN	1 ul	2.049999952316284 V	Step-Down	6 V	27.030000686645508 °C/W	Surface Mount	Buck	1 ul	1.4500000476837158 ul	6-SON	0.5 A	Positive	3000000 Hz
Texas Instruments TPS62230EVM-370 TPS62230, TPS62231, TPS62232 - DC/DC, Step Down 3, Non-Isolated Outputs Evaluation Board															0.5 A		3000000 Hz	Non-Isolated	3 ul	Board(s)	2.049999952316284 V	6 V	DC/DC, Step Down	TPS62230, TPS62231, TPS62232	Fully Populated
Texas Instruments TPS62230EVM-574 TPS62230, TPS62231, TPS62232 - DC/DC, Step Down 3, Non-Isolated Outputs Evaluation Board															0.5 A		3000000 Hz	Non-Isolated	3 ul	Board(s)	2.049999952316284 V	6 V	DC/DC, Step Down	TPS62230, TPS62231, TPS62232	Fully Populated

Key Features

• 2 MHz / 3 MHz Switching FrequencyUp to 94% EfficiencyOutput Peak Current up to 500 mAOperating Junction Temperature of –40°C to 125°CHigh PSRR (up to 90 dB)Small External Output Filter Components 1 µH and 4.7 µFVINrange from 2.05 V to 6 VOptimized Power-Save Mode for Low Output Ripple VoltageForced PWM Mode OperationTyp. 22-µA Quiescent Current100% Duty Cycle for Lowest DropoutSmall 1-mm × 1.5-mm × 0.6-mm USON Package12-mm2Minimum Solution SizeSupports 0.6-mm Maximum Solution HeightAPPLICATIONSLDO ReplacementPortable Audio, Portable MediaLow Power WirelessLow Power DSP Core SupplyDigital CamerasAll other trademarks are the property of their respective owners2 MHz / 3 MHz Switching FrequencyUp to 94% EfficiencyOutput Peak Current up to 500 mAOperating Junction Temperature of –40°C to 125°CHigh PSRR (up to 90 dB)Small External Output Filter Components 1 µH and 4.7 µFVINrange from 2.05 V to 6 VOptimized Power-Save Mode for Low Output Ripple VoltageForced PWM Mode OperationTyp. 22-µA Quiescent Current100% Duty Cycle for Lowest DropoutSmall 1-mm × 1.5-mm × 0.6-mm USON Package12-mm2Minimum Solution SizeSupports 0.6-mm Maximum Solution HeightAPPLICATIONSLDO ReplacementPortable Audio, Portable MediaLow Power WirelessLow Power DSP Core SupplyDigital CamerasAll other trademarks are the property of their respective owners

Description

The TPS6223x device family is a high-frequency, synchronous, step-down DC – DC converter optimized for battery powered portable applications. It supports up to 500-mA output current and allows the use of tiny and low-cost chip inductors and capacitors. With a wide input voltage range of 2.05 V to 6 V, the device supports applications powered by Li-Ion batteries with extended voltage range. The minimum input voltage of 2.05 V allows as well the operation from Li-primary or two alkaline batteries. Different fixed output voltage versions are available from 1.0 V to 3.3 V. The TPS6223x series features switch frequency up to 3.8 MHz. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode and automatically enters power-save mode operation at light load currents to maintain high efficiency over the entire load current range. Because of its excellent power supply rejection ratio (PSRR) and AC load regulation performance, the device is also suitable to replace linear regulators to obtain better power conversion efficiency. The power-save mode in TPS6223x reduces the quiescent current consumption down to 22 µA during light load operation. It is optimized to achieve very low output voltage ripple even with small external component and features excellent AC load regulation. For very noise-sensitive applications, the device can be forced to PWM mode operation over the entire load range by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6223x operates over a junction temperature range of –40°C to 125°C. It is available in a 1 mm × 1.5 mm × 0.6 mm 6-pin SON package. The TPS6223x device family is a high-frequency, synchronous, step-down DC – DC converter optimized for battery powered portable applications. It supports up to 500-mA output current and allows the use of tiny and low-cost chip inductors and capacitors. With a wide input voltage range of 2.05 V to 6 V, the device supports applications powered by Li-Ion batteries with extended voltage range. The minimum input voltage of 2.05 V allows as well the operation from Li-primary or two alkaline batteries. Different fixed output voltage versions are available from 1.0 V to 3.3 V. The TPS6223x series features switch frequency up to 3.8 MHz. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode and automatically enters power-save mode operation at light load currents to maintain high efficiency over the entire load current range. Because of its excellent power supply rejection ratio (PSRR) and AC load regulation performance, the device is also suitable to replace linear regulators to obtain better power conversion efficiency. The power-save mode in TPS6223x reduces the quiescent current consumption down to 22 µA during light load operation. It is optimized to achieve very low output voltage ripple even with small external component and features excellent AC load regulation. For very noise-sensitive applications, the device can be forced to PWM mode operation over the entire load range by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6223x operates over a junction temperature range of –40°C to 125°C. It is available in a 1 mm × 1.5 mm × 0.6 mm 6-pin SON package.