Catalog(1 parts)
| Part | Contents | Voltage - Output▲▼ | Voltage - Input▲▼ | Voltage - Input▲▼ | Outputs and Type | Current - Output / Channel▲▼ | Utilized IC / Part |
|---|---|---|---|---|---|---|---|
Board(s), Cable(s) | 6 V | 3 V | 5.5 V | 36 Non-Isolated Outputs | 0.03500000014901161 A | LP5036 |
Key Features
• Operating Voltage Range:VCCRange: 2.7 V to 5.5 VEN, SDA, and SCL Pins Compatible With 1.8-V, 3.3-V, and 5-V Power RailsOutput Maximum Voltage: 6 V36 Constant-Current Sinks With High Precision25.5 mA Maximum per Channel When VCCin Full Range35 mA Maximum per Channel When VCC≥ 3.3 VDevice-to-Device Error ±5%; Channel-to-Channel Error ±5%Ultralow Quiescent Current:Shutdown Mode: 1 µA (Maximum) When EN LowPower Saving Mode: 12 µA (Maximum) When EN High and All LEDs Off for > 30 msIntegrated 12-Bit, 29-kHz PWM Generator for Each Channel:Independent Color-Mixing Register Per ChannelIndependent Brightness-Control Register Per RGB LED ModuleOptional Logarithmic- or Linear-Scale Brightness ControlIntegrated 3-Phase-Shifting PWM Scheme3 Programmable Banks (R, G, B) for Easy Software Control of Each Color2 External Hardware Address Pins Allow Connecting up to 4 DevicesBroadcast Slave Address Allows Configuring Multiple Devices SimultaneouslyAuto-Increment Allows Writing or Reading Consecutive Registers Within One TransmissionUp to 400-kHz Fast-Mode I2C SpeedOperating Voltage Range:VCCRange: 2.7 V to 5.5 VEN, SDA, and SCL Pins Compatible With 1.8-V, 3.3-V, and 5-V Power RailsOutput Maximum Voltage: 6 V36 Constant-Current Sinks With High Precision25.5 mA Maximum per Channel When VCCin Full Range35 mA Maximum per Channel When VCC≥ 3.3 VDevice-to-Device Error ±5%; Channel-to-Channel Error ±5%Ultralow Quiescent Current:Shutdown Mode: 1 µA (Maximum) When EN LowPower Saving Mode: 12 µA (Maximum) When EN High and All LEDs Off for > 30 msIntegrated 12-Bit, 29-kHz PWM Generator for Each Channel:Independent Color-Mixing Register Per ChannelIndependent Brightness-Control Register Per RGB LED ModuleOptional Logarithmic- or Linear-Scale Brightness ControlIntegrated 3-Phase-Shifting PWM Scheme3 Programmable Banks (R, G, B) for Easy Software Control of Each Color2 External Hardware Address Pins Allow Connecting up to 4 DevicesBroadcast Slave Address Allows Configuring Multiple Devices SimultaneouslyAuto-Increment Allows Writing or Reading Consecutive Registers Within One TransmissionUp to 400-kHz Fast-Mode I2C Speed
Description
AI
Efficient and high-performance LED response effects, such as blinking, breathing, and chasing, are critical to improving end-user experience in many human machine interface (HMI) applications.
The LP503x device is a 30- or 36-channel constant-current-sink LED driver. The LP503x has a 29 kHz, 12-Bit PWM generator for each channel, as well as channel/module independent color mixing andintensity control, formerly called brightness control registers to enable vivid LED effects with zero audible noise. Users can benefit from the device’s ultra-low shutdown Iq Power Saving Mode, while designers will appreciate the incredibly straightforward software coding of the LP503x’s three programmable R G B banks.
The LP503x device controls each LED output with a 12-bit PWM resolution at 29-kHz switching frequency. This control helps get anintensitythat decreases smoothly and stops audible noise. Having different color-mixing and intensity-control registers makes writing the software code straightforward. When targeting fade-in, fade-out type breathing effects, the global R, G, B bank control reduces the microcontroller loading significantly. The LP503x device also implements a PWM phase-shifting function to help reduce the input power budget when LEDs turn on simultaneously.
The LP503x device has an automatic power-saving mode to get the ultra-low quiescent current. When channels are all off for 30 ms, the device total power consumption is down to 10 µA, making the LP503x device a possible alternative for battery-powered end equipment.
Efficient and high-performance LED response effects, such as blinking, breathing, and chasing, are critical to improving end-user experience in many human machine interface (HMI) applications.
The LP503x device is a 30- or 36-channel constant-current-sink LED driver. The LP503x has a 29 kHz, 12-Bit PWM generator for each channel, as well as channel/module independent color mixing andintensity control, formerly called brightness control registers to enable vivid LED effects with zero audible noise. Users can benefit from the device’s ultra-low shutdown Iq Power Saving Mode, while designers will appreciate the incredibly straightforward software coding of the LP503x’s three programmable R G B banks.
The LP503x device controls each LED output with a 12-bit PWM resolution at 29-kHz switching frequency. This control helps get anintensitythat decreases smoothly and stops audible noise. Having different color-mixing and intensity-control registers makes writing the software code straightforward. When targeting fade-in, fade-out type breathing effects, the global R, G, B bank control reduces the microcontroller loading significantly. The LP503x device also implements a PWM phase-shifting function to help reduce the input power budget when LEDs turn on simultaneously.
The LP503x device has an automatic power-saving mode to get the ultra-low quiescent current. When channels are all off for 30 ms, the device total power consumption is down to 10 µA, making the LP503x device a possible alternative for battery-powered end equipment.