TLV9004 Series
Quad, 5.5-V, 1-MHz, RRIO operational amplifier for cost-optimized applications
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Voltage - Input Offset▲▼ | Slew Rate▲▼ | Mounting Type | Supplier Device Package | Gain Bandwidth Product▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Amplifier Type | Current - Supply▲▼ | Current - Output / Channel▲▼ | Output Type | Voltage - Supply Span (Min)▲▼ | Number of Circuits▲▼ | Current - Input Bias▲▼ | Package / Case | Package / Case▲▼ | Package / Case▲▼ | Voltage - Supply Span (Max)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.00039999998989515007 V | 2000000 V/s | Surface Mount | 14-TSSOP | 1000000 Hz | -40 °C | 125 °C | General Purpose | 0.00005999999848427251 A | 0.03999999910593033 A | Rail-to-Rail | 1.7999999523162842 V | 4 ul | 4.999999980020986e-12 A | 14-TSSOP | 0.004394200164824724 m | 0.004399999976158142 m | 5.5 V | |
0.00039999998989515007 V | 2000000 V/s | Surface Mount | 14-QFN (2x2) | 1000000 Hz | -40 °C | 125 °C | General Purpose | 0.00005999999848427251 A | 0.03999999910593033 A | Rail-to-Rail | 1.7999999523162842 V | 4 ul | 4.999999980020986e-12 A | 14-XFQFN | 5.5 V |
Key Features
• Scalable CMOS amplifier for low-cost applicationsRail-to-rail input and outputLow input offset voltage: ±0.4 mVUnity-gain bandwidth: 1 MHzLow broadband noise: 27 nV/√HzLow input bias current: 5 pALow quiescent current: 60 µA/ChUnity-gain stableInternal RFI and EMI filterOperational at supply voltages as low as 1.8 VEasier to stabilize with higher capacitive load due to resistive open-loop output impedanceExtended temperature range: –40°C to 125°CScalable CMOS amplifier for low-cost applicationsRail-to-rail input and outputLow input offset voltage: ±0.4 mVUnity-gain bandwidth: 1 MHzLow broadband noise: 27 nV/√HzLow input bias current: 5 pALow quiescent current: 60 µA/ChUnity-gain stableInternal RFI and EMI filterOperational at supply voltages as low as 1.8 VEasier to stabilize with higher capacitive load due to resistive open-loop output impedanceExtended temperature range: –40°C to 125°C
Description
AI
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.
Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.
Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.