TPA6130A2 Series
138-mW, stereo, analog input headphone amplifier with I2C control interface
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
138-mW, stereo, analog input headphone amplifier with I2C control interface
| Part | Max Output Power x Channels @ Load [custom] | Max Output Power x Channels @ Load [custom] | Package / Case | Mounting Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Type | Features | Output Type | Supplier Device Package | Supplier Device Package [x] | Supplier Device Package [y] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPA6130A2YZHR | 290 mW | 138 mW | 16-UFBGA, DSBGA | Surface Mount | 2.5 V | 5.5 V | 85 °C | -40 °C | Class AB | Depop, Differential Inputs, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control | Headphones, 2-Channel (Stereo) | 16-DSBGA | 2.24 | 2.16 |
Texas Instruments TPA6130A2RTJR | 290 mW | 138 mW | 20-WFQFN Exposed Pad | Surface Mount | 2.5 V | 5.5 V | 85 °C | -40 °C | Class AB | Depop, Differential Inputs, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control | Headphones, 2-Channel (Stereo) | 20-QFN (4x4) | ||
Texas Instruments TPA6130A2RTJT | 290 mW | 138 mW | 20-WFQFN Exposed Pad | Surface Mount | 2.5 V | 5.5 V | 85 °C | -40 °C | Class AB | Depop, Differential Inputs, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control | Headphones, 2-Channel (Stereo) | 20-QFN (4x4) | ||
Texas Instruments TPA6130A2YZHT | 290 mW | 138 mW | 16-UFBGA, DSBGA | Surface Mount | 2.5 V | 5.5 V | 85 °C | -40 °C | Class AB | Depop, Differential Inputs, I2C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control | Headphones, 2-Channel (Stereo) | 16-DSBGA | 2.24 | 2.16 |
Key Features
• DirectPath™ Ground-Referenced OutputsEliminates Output DC Blocking CapacitorsReduces Board AreaReduces Component Height and CostFull Bass Response Without AttenuationPower Supply Voltage Range: 2.5 V to 5.5 V64 Step Audio Taper Volume ControlHigh Power Supply Rejection Ratio(>100 dB PSRR)Differential Inputs for Maximum Noise Rejection(68 dB CMRR)High-Impedance Outputs When DisabledAdvanced Pop and Click Suppression CircuitryDigital I2C Bus ControlPer Channel Mute and EnableSoftware ShutdownMulti-Mode Support: Stereo HP, Dual MonoHP, and Single-Channel BTL OperationAmplifier StatusSpace Saving Packages20 Pin, 4 mm × 4 mm QFN16 ball, 2 mm × 2 mm DSBGAESD Protection of 8 kV HBM and IEC ContactDirectPath™ Ground-Referenced OutputsEliminates Output DC Blocking CapacitorsReduces Board AreaReduces Component Height and CostFull Bass Response Without AttenuationPower Supply Voltage Range: 2.5 V to 5.5 V64 Step Audio Taper Volume ControlHigh Power Supply Rejection Ratio(>100 dB PSRR)Differential Inputs for Maximum Noise Rejection(68 dB CMRR)High-Impedance Outputs When DisabledAdvanced Pop and Click Suppression CircuitryDigital I2C Bus ControlPer Channel Mute and EnableSoftware ShutdownMulti-Mode Support: Stereo HP, Dual MonoHP, and Single-Channel BTL OperationAmplifier StatusSpace Saving Packages20 Pin, 4 mm × 4 mm QFN16 ball, 2 mm × 2 mm DSBGAESD Protection of 8 kV HBM and IEC Contact
Description
AI
The TPA6130A2 is a stereo DirectPath™ headphone amplifier with I2C digital volume control. The TPA6130A2 has minimal quiescent current consumption, with a typical IDDof 4 mA, making it optimal for portable applications. The I2C control allows maximum flexibility with a 64 step audio taper volume control, channel independent enables and mutes, and the ability to configure the outputs into stereo, dual mono, or a single receiver speaker BTL amplifier that drives 300 mW of power into 16 Ω loads.
The TPA6130A2 is a high fidelity amplifier with an SNR of 98 dB. A PSRR greater than 100 dB enables direct-to-battery connections without compromising the listening experience. The output noise of 9 µVrms (typicalA-weighted) provides a minimal noise background during periods of silence. Configurable differential inputs and high CMRR allow for maximum noise rejection in the noisy environment of a mobile device.
TPA6130A2 packaging includes a 2 by 2 mm chip-scale package, and a 4 by 4 mm QFN package.
The TPA6130A2 is a stereo DirectPath™ headphone amplifier with I2C digital volume control. The TPA6130A2 has minimal quiescent current consumption, with a typical IDDof 4 mA, making it optimal for portable applications. The I2C control allows maximum flexibility with a 64 step audio taper volume control, channel independent enables and mutes, and the ability to configure the outputs into stereo, dual mono, or a single receiver speaker BTL amplifier that drives 300 mW of power into 16 Ω loads.
The TPA6130A2 is a high fidelity amplifier with an SNR of 98 dB. A PSRR greater than 100 dB enables direct-to-battery connections without compromising the listening experience. The output noise of 9 µVrms (typicalA-weighted) provides a minimal noise background during periods of silence. Configurable differential inputs and high CMRR allow for maximum noise rejection in the noisy environment of a mobile device.
TPA6130A2 packaging includes a 2 by 2 mm chip-scale package, and a 4 by 4 mm QFN package.