MSP430FR2033 Series
16 MHz MCU with 16KB FRAM, 2KB SRAM, 10-bit ADC, UART/SPI/I2C, IR logic, timer
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Mounting Type | Program Memory Size▲▼ | Data Converters▲▼ | Data Converters▲▼ | Package / Case | Package / Case▲▼ | Package / Case▲▼ | Program Memory Type | Core Size | Speed▲▼ | Voltage - Supply (Vcc/Vdd)▲▼ | Voltage - Supply (Vcc/Vdd)▲▼ | Supplier Device Package | RAM Size▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Core Processor | Connectivity | Oscillator Type | Number of I/O▲▼ | Data Converters▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430FR2033IG56RMSP430 CPU16 MSP430™ FRAM Microcontroller IC 16-Bit 16MHz 15.5KB (15.5K x 8) FRAM 56-TSSOP | Surface Mount | 126976 b | 8 ul | 10 b | 56-TFSOP | 0.006099999882280827 m | 0.006095999851822853 m | FRAM | 16-Bit | 16000000 Hz | 3.5999999046325684 V | 1.7999999523162842 V | 56-TSSOP | -271.1499938964844 °C | 85 °C | -40 °C | MSP430 CPU16 | I2C, IrDA, SCI, SPI, UART/USART | Internal | 52 ul | |
Texas Instruments MSP430FR2033IPMRMSP430 CPU16 MSP430™ FRAM Microcontroller IC 16-Bit 16MHz 15.5KB (15.5K x 8) FRAM 64-LQFP (10x10) | Surface Mount | 126976 b | 10 ul | 64-LQFP | FRAM | 16-Bit | 16000000 Hz | 3.5999999046325684 V | 1.7999999523162842 V | 64-LQFP (10x10) | -271.1499938964844 °C | 85 °C | -40 °C | MSP430 CPU16 | I2C, IrDA, SCI, SPI, UART/USART | Internal | 60 ul | 10 b |
Key Features
• Embedded microcontroller16-bit RISC architecture up to 16 MHzWide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS Specifications)Optimized low-power modes (at 3 V)Active: 126 µA/MHzStandbyLPM3.5 with VLO: 0.4 µAReal-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 0.77 µAShutdown (LPM4.5): 15 nALow-power ferroelectric RAM (FRAM)Up to 15.5KB of nonvolatile memoryBuilt-in error correction code (ECC)Configurable write protectionUnified memory of program, constants, and storage1015write cycle enduranceRadiation resistant and nonmagneticIntelligent digital peripheralsIR modulation logicTwo 16-bit timers with three capture/compare registers each (Timer_A3)One 16-bit counter-only RTC counter16-bit cyclic redundancy check (CRC)Enhanced serial communicationsEnhanced USCI A (eUSCI_A) supports UART, IrDA, and SPIEnhanced USCI B (eUSCI_B) supports SPI and I2CHigh-performance analog10-channel 10-bit analog-to-digital converter (ADC)Internal 1.5-V referenceSample-and-hold 200 kspsClock system (CS)On-chip 32-kHz RC oscillator (REFO)On-chip 16-MHz digitally controlled oscillator (DCO) with frequency locked loop (FLL)±1% accuracy with on-chip reference at room temperatureOn-chip very low-frequency 10-kHz oscillator (VLO)On-chip high-frequency modulation oscillator clock (MODCLK)External 32-kHz crystal oscillator (XT1)Programmable MCLK prescalar of 1 to 128SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8General input/output and pin functionalityTotal 60 I/Os on 64-pin package16 interrupt pins (P1 and P2) can wake MCU from LPMsAll I/Os are capacitive touch I/OsDevelopment tools and softwareFree professional development environmentsFamily members (also see Device Comparison)MSP430FR2033: 15KB of program FRAM + 512B of information FRAM + 2KB of RAMMSP430FR2032: 8KB of program FRAM + 512B of information FRAM + 1KB of RAMPackage options64 pin: LQFP (PM)56 pin: TSSOP (G56)48 pin: TSSOP (G48)Embedded microcontroller16-bit RISC architecture up to 16 MHzWide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS Specifications)Optimized low-power modes (at 3 V)Active: 126 µA/MHzStandbyLPM3.5 with VLO: 0.4 µAReal-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 0.77 µAShutdown (LPM4.5): 15 nALow-power ferroelectric RAM (FRAM)Up to 15.5KB of nonvolatile memoryBuilt-in error correction code (ECC)Configurable write protectionUnified memory of program, constants, and storage1015write cycle enduranceRadiation resistant and nonmagneticIntelligent digital peripheralsIR modulation logicTwo 16-bit timers with three capture/compare registers each (Timer_A3)One 16-bit counter-only RTC counter16-bit cyclic redundancy check (CRC)Enhanced serial communicationsEnhanced USCI A (eUSCI_A) supports UART, IrDA, and SPIEnhanced USCI B (eUSCI_B) supports SPI and I2CHigh-performance analog10-channel 10-bit analog-to-digital converter (ADC)Internal 1.5-V referenceSample-and-hold 200 kspsClock system (CS)On-chip 32-kHz RC oscillator (REFO)On-chip 16-MHz digitally controlled oscillator (DCO) with frequency locked loop (FLL)±1% accuracy with on-chip reference at room temperatureOn-chip very low-frequency 10-kHz oscillator (VLO)On-chip high-frequency modulation oscillator clock (MODCLK)External 32-kHz crystal oscillator (XT1)Programmable MCLK prescalar of 1 to 128SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8General input/output and pin functionalityTotal 60 I/Os on 64-pin package16 interrupt pins (P1 and P2) can wake MCU from LPMsAll I/Os are capacitive touch I/OsDevelopment tools and softwareFree professional development environmentsFamily members (also see Device Comparison)MSP430FR2033: 15KB of program FRAM + 512B of information FRAM + 2KB of RAMMSP430FR2032: 8KB of program FRAM + 512B of information FRAM + 1KB of RAMPackage options64 pin: LQFP (PM)56 pin: TSSOP (G56)48 pin: TSSOP (G48)
Description
AI
The TI MSP430™ family of low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in less than 10 µs.
For complete module descriptions, see theMSP430FR4xx and MSP430FR2xx Family User’s Guide.
The TI MSP430™ family of low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in less than 10 µs.
For complete module descriptions, see theMSP430FR4xx and MSP430FR2xx Family User’s Guide.