Catalog(3 parts)
| Part | Duplex | Package / Case | Package / Case▲▼ | Package / Case▲▼ | Protocol | Data Rate▲▼ | Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Mounting Type | Operating Temperature▲▼ | Operating Temperature▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Full | 8-MSOP, 8-TSSOP | 0.0029972000047564507 m | 0.003000000026077032 m | LVDS | 157286400 bit/s | Transceiver | 3.5999999046325684 V | 3 V | Surface Mount | -40 °C | 85 °C | |
Full | 8-MSOP, 8-TSSOP | 0.0029972000047564507 m | 0.003000000026077032 m | LVDS | 157286400 bit/s | Transceiver | 3.5999999046325684 V | 3 V | Surface Mount | -40 °C | 85 °C | |
Full | 8-MSOP, 8-TSSOP | 0.0029972000047564507 m | 0.003000000026077032 m | LVDS | 157286400 bit/s | Transceiver | 3.5999999046325684 V | 3 V | Surface Mount | -40 °C | 85 °C |
Key Features
• Meets or Exceeds the Requirements of ANSITIA/EIA-644-1995 StandardFull-Duplex Signaling Rates up to 150 MbpsBus-Pin ESD Exceeds 12 kVOperates From a Single 3.3-V SupplyLow-Voltage Differential Signaling With TypicalOutput Voltages of 350 mV and a 100-Ω LoadPropagation Delay TimesDriver: 1.7 ns TypicalReceiver: 3.7 ns TypicalPower Dissipation at 200 MHzDriver: 25 mW TypicalReceiver: 60 mW TypicalLVTTL Input Levels Are 5-V TolerantReceiver Maintains High Input Impedance WithVCC< 1.5 VReceiver Has Open-Circuit Fail SafeMeets or Exceeds the Requirements of ANSITIA/EIA-644-1995 StandardFull-Duplex Signaling Rates up to 150 MbpsBus-Pin ESD Exceeds 12 kVOperates From a Single 3.3-V SupplyLow-Voltage Differential Signaling With TypicalOutput Voltages of 350 mV and a 100-Ω LoadPropagation Delay TimesDriver: 1.7 ns TypicalReceiver: 3.7 ns TypicalPower Dissipation at 200 MHzDriver: 25 mW TypicalReceiver: 60 mW TypicalLVTTL Input Levels Are 5-V TolerantReceiver Maintains High Input Impedance WithVCC< 1.5 VReceiver Has Open-Circuit Fail Safe
Description
AI
The SN65LVDS179, SN65LVDS180, SN65LVDS050, and SN65LVDS051 devices are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.
These devices offer various driver, receiver, and enabling combinations in industry-standard footprints. Because these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. For these functions with a high-impedance driver output, see the SN65LVDM series of devices. All devices are characterized for operation from –40°C to 85°C.
The SN65LVDS179, SN65LVDS180, SN65LVDS050, and SN65LVDS051 devices are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.
These devices offer various driver, receiver, and enabling combinations in industry-standard footprints. Because these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. For these functions with a high-impedance driver output, see the SN65LVDM series of devices. All devices are characterized for operation from –40°C to 85°C.