SN75LBC170 Series
Triple Differential Transceivers
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Triple Differential Transceivers
Part | Operating Temperature [Max] | Operating Temperature [Min] | Type | Data Rate | Package / Case [y] | Package / Case | Package / Case [y] | Duplex | Supplier Device Package | Mounting Type | Protocol | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Receiver Hysteresis | Voltage - Supply [Min] | Voltage - Supply [Max] |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments SN75LBC170DB | 70 ░C | 0 °C | Transceiver | 30 Mbps | 0.209 in | 16-SSOP | 5.3 mm | Half | 16-SSOP | Surface Mount | RS422, RS485 | 3 | 3 | 40 mV | 4.75 V | 5.25 V |
Key Features
• Three Differential Transceivers in One PackageSignaling Rates† Up to 30 MbpsLow Power and High SpeedDesigned for TIA/EIA-485, TIA/EIA-422, ISO 8482, and ANSI X3.277 (HVD SCSI Fast-20) ApplicationsCommon-Mode Bus Voltage Range –7 V to 12 VESD Protection on Bus Terminals Exceeds 12 kVDriver Output Current up to ±60 mAThermal Shutdown ProtectionDriver Positive and Negative Current LimitingPower-Up, Power-Down Glitch-Free OperationPin-Compatible With the SN75ALS170Available in Shrink Small-Outline PackageThree Differential Transceivers in One PackageSignaling Rates† Up to 30 MbpsLow Power and High SpeedDesigned for TIA/EIA-485, TIA/EIA-422, ISO 8482, and ANSI X3.277 (HVD SCSI Fast-20) ApplicationsCommon-Mode Bus Voltage Range –7 V to 12 VESD Protection on Bus Terminals Exceeds 12 kVDriver Output Current up to ±60 mAThermal Shutdown ProtectionDriver Positive and Negative Current LimitingPower-Up, Power-Down Glitch-Free OperationPin-Compatible With the SN75ALS170Available in Shrink Small-Outline Package
Description
AI
The SN65LBC170 and SN75LBC170 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ribbon, or twisted-pair cabling. These devices are suitable for FAST-20 SCSI and can transmit or receive data pulses as short as 25 ns, with skew less than 3 ns.
These devices combine three 3-state differential line drivers and three differential input line receivers, all of which operate from a single 5-V power supply.
The driver differential outputs and the receiver differential inputs are connected internally to form three differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC= 0. These ports feature a wide common-mode voltage range making the device suitable for party-line applications over long cable runs.
The driver’s active-high enable and the receiver’s active-low enable are tied together internally and provide a direction input for each driver/receiver pair.
The SN75LBC170 is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC170 is characterized for operation over the temperature range of –40°C to 85°C.
The SN65LBC170 and SN75LBC170 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ribbon, or twisted-pair cabling. These devices are suitable for FAST-20 SCSI and can transmit or receive data pulses as short as 25 ns, with skew less than 3 ns.
These devices combine three 3-state differential line drivers and three differential input line receivers, all of which operate from a single 5-V power supply.
The driver differential outputs and the receiver differential inputs are connected internally to form three differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC= 0. These ports feature a wide common-mode voltage range making the device suitable for party-line applications over long cable runs.
The driver’s active-high enable and the receiver’s active-low enable are tied together internally and provide a direction input for each driver/receiver pair.
The SN75LBC170 is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC170 is characterized for operation over the temperature range of –40°C to 85°C.