DRV8212 Series

12-V, 4-A H-bridge motor driver with auto sleep mode

Catalog

12-V, 4-A H-bridge motor driver with auto sleep mode

Part	Function	Interface	Voltage - Load (Min)	Voltage - Load (Max)	Technology	Voltage - Supply (Minimum)	Voltage - Supply (Maximum)	Applications	Motor Type - Stepper	Package / Case	Operating Temperature (Max)	Operating Temperature (Min)	Current - Output	Mounting Type	Motor Type - AC, DC	Half-Bridge Count	Output Configuration	Package Width	Package Name	Package Length
Texas Instruments DRV8212PDSGR	Control and Power Stage Driver - Fully Integrated	On/Off PWM	0 V	11 V	NMOS	1.65 V	5.5 V	Camera	Bipolar	8-WFDFN Exposed Pad	125 °C	-40 °C	4 A	Surface Mount	Brushed DC	2	Half Bridge	2 mm	8-WSON	2 mm
Texas Instruments DRV8212DRLR	Control and Power Stage Driver - Fully Integrated	PWM	1.65 V	11 V	NMOS	1.65 V	11 V	Brushed DC Camera	Bipolar	SOT-563 SOT-666	125 °C	-40 °C	4 A	Surface Mount	Brushed DC	2	Half Bridge		SOT-563
Texas Instruments DRV8212DSGR	Control and Power Stage Driver - Fully Integrated	On/Off PWM	0 V	11 V	NMOS	1.65 V	5.5 V	Camera	Bipolar	8-WFDFN Exposed Pad	125 °C	-40 °C	4 A	Surface Mount	Brushed DC	2	Half Bridge	2 mm	8-WSON	2 mm

Catalog

12-V, 4-A H-bridge motor driver with auto sleep mode

Description

The DRV8212P is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The tripler charge pump architecture allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation. The DRV8212P supports an industry standard PWM (IN1/IN2) control interface. The nSLEEP pin controls a low-power sleep mode which achieves ultra-low quiescent current draw by disabling the internal circuitry. The device can supply up to 4-A peak output current. It operates with a supply voltage from 1.65 V to 5.5 V. The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD). The DRV8212P is part of a family of devices which come in pin-to-pin scalable RDS(on)and supply voltage options to support various loads and supply rails with minimal design changes. See Section 5 for information on the devices in this family. View our full portfolio ofbrushed motor driverson ti.com. The DRV8212P is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The tripler charge pump architecture allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation. The DRV8212P supports an industry standard PWM (IN1/IN2) control interface. The nSLEEP pin controls a low-power sleep mode which achieves ultra-low quiescent current draw by disabling the internal circuitry. The device can supply up to 4-A peak output current. It operates with a supply voltage from 1.65 V to 5.5 V. The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD). The DRV8212P is part of a family of devices which come in pin-to-pin scalable RDS(on)and supply voltage options to support various loads and supply rails with minimal design changes. See Section 5 for information on the devices in this family. View our full portfolio ofbrushed motor driverson ti.com.