DRV8813 Series

45-V, 2.5-A bipolar stepper or dual H-bridge motor driver with current regulation

Link to Manufacturer Page: https://www.ti.com/

Catalog

45-V, 2.5-A bipolar stepper or dual H-bridge motor driver with current regulation

Part	Voltage - Load [Min]	Voltage - Load [Max]	Function	Output Configuration	Motor Type - Stepper	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case	Technology	Supplier Device Package	Mounting Type	Current - Output	Applications	Voltage - Supply [Max]	Voltage - Supply [Min]	Motor Type - AC, DC	Interface	Primary Attributes	Utilized IC / Part	Embedded	Type	Secondary Attributes	Supplied Contents
Texas Instruments DRV8813PWPR	8.2 V	45 V	Driver - Fully Integrated, Control and Power Stage	Half Bridge (4)	Bipolar	150 C	-40 °C	28-PowerTSSOP	Power MOSFET	28-HTSSOP	Surface Mount	2.5 A	General Purpose	45 V	8.2 V	Brushed DC	Parallel
Texas Instruments DRV8813EVM			Motor Controller/Driver															2 Channel H-Bridge Driver	DRV8813	Yes, MCU, 16-Bit	Power Management	Short-Circuit, Thermal, Undervoltage Protection	Board(s)
Texas Instruments DRV8813PWP	8.2 V	45 V	Driver - Fully Integrated, Control and Power Stage	Half Bridge (4)	Bipolar	150 C	-40 °C	28-PowerTSSOP	Power MOSFET	28-HTSSOP	Surface Mount	2.5 A	General Purpose	45 V	8.2 V	Brushed DC	Parallel

Key Features

• 8.2-V to 45-V Operating Supply Voltage Range2.5-A Maximum Drive Current at 24 V andTA= 25°CDual H-Bridge Current Control Motor DriverDrive a Bipolar Stepper or Two DC MotorsFour Level Winding Current ControlMultiple Decay ModesMixed DecaySlow DecayFast DecayIndustry Standard Parallel Digital ControlInterfaceLow Current Sleep ModeBuilt In 3.3-V ReferenceOutputSmall Package and FootprintProtection FeaturesOvercurrent Protection (OCP)Thermal Shutdown (TSD)VM Undervoltage Lockout (UVLO)Fault Condition Indication Pin (nFAULT)8.2-V to 45-V Operating Supply Voltage Range2.5-A Maximum Drive Current at 24 V andTA= 25°CDual H-Bridge Current Control Motor DriverDrive a Bipolar Stepper or Two DC MotorsFour Level Winding Current ControlMultiple Decay ModesMixed DecaySlow DecayFast DecayIndustry Standard Parallel Digital ControlInterfaceLow Current Sleep ModeBuilt In 3.3-V ReferenceOutputSmall Package and FootprintProtection FeaturesOvercurrent Protection (OCP)Thermal Shutdown (TSD)VM Undervoltage Lockout (UVLO)Fault Condition Indication Pin (nFAULT)

Description

The DRV8813 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar stepper motor or two DC motors. The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8813 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C). A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable. Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout and overtemperature. The DRV8813 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br). The DRV8813 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar stepper motor or two DC motors. The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8813 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C). A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable. Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout and overtemperature. The DRV8813 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).