Catalog(4 parts)
| Part | Supplier Device Package | Package / Case | Mounting Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Outputs▲▼ | Current - Output▲▼ | Output Configuration | Voltage - Output (Min/Fixed)▲▼ | Function | Topology | Frequency - Switching▲▼ | Synchronous Rectifier▲▼ | Voltage - Input (Max)▲▼ | Voltage - Input (Min)▲▼ | Output Type▲▼ | Qualification | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS62171DSGTBuck Switching Regulator IC Positive Fixed 1.8V 1 Output 500mA 8-WFDFN Exposed Pad | 8-WSON (2x2) | 8-WFDFN Exposed Pad | Surface Mount | 85 °C | -40 °C | 1 ul | 0.5 A | Positive | 1.7999999523162842 V | Step-Down | Buck | 2250000 Hz | 17 V | 3 V | 27.030000686645508 °C/W | |||
Texas Instruments TPS62171QDSGTQ1Buck Switching Regulator IC Positive Fixed 1.8V 1 Output 500mA 8-WFDFN Exposed Pad | 8-WSON (2x2) | 8-WFDFN Exposed Pad | Surface Mount | 125 °C | -40 °C | 1 ul | 0.5 A | Positive | 1.7999999523162842 V | Step-Down | Buck | 2250000 Hz | 17 V | 3 V | 27.030000686645508 °C/W | AEC-Q100 | Automotive | |
Texas Instruments TPS62171DSGRBuck Switching Regulator IC Positive Fixed 1.8V 1 Output 500mA 8-WFDFN Exposed Pad | 8-WSON (2x2) | 8-WFDFN Exposed Pad | Surface Mount | 85 °C | -40 °C | 1 ul | 0.5 A | Positive | 1.7999999523162842 V | Step-Down | Buck | 2250000 Hz | 17 V | 3 V | 27.030000686645508 °C/W | |||
Texas Instruments TPS62171QDSGRQ1Buck Switching Regulator IC Positive Fixed 1.8V 1 Output 500mA 8-WFDFN Exposed Pad | 8-WSON (2x2) | 8-WFDFN Exposed Pad | Surface Mount | 125 °C | -40 °C | 1 ul | 0.5 A | Positive | 1.7999999523162842 V | Step-Down | Buck | 2250000 Hz | 17 V | 3 V | 27.030000686645508 °C/W | AEC-Q100 | Automotive |
Key Features
• DCS-Control™ TopologyInput Voltage Range from 3 V to 17 VUp to 500-mA Output CurrentAdjustable Output Voltage from 0.9 V to 6 VFixed Output Voltage VersionsSeamless Power Save Mode TransitionTypically 17-µA Quiescent CurrentPower Good Output100% Duty Cycle ModeShort Circuit ProtectionOver Temperature ProtectionPin to Pin Compatible withTPS62160andTPS62125Available in a 2-mm × 2-mm 8-Pin WSON PackageCreate a Custom Design using the TPS62170 with theWEBENCH® Power DesignerDCS-Control™ TopologyInput Voltage Range from 3 V to 17 VUp to 500-mA Output CurrentAdjustable Output Voltage from 0.9 V to 6 VFixed Output Voltage VersionsSeamless Power Save Mode TransitionTypically 17-µA Quiescent CurrentPower Good Output100% Duty Cycle ModeShort Circuit ProtectionOver Temperature ProtectionPin to Pin Compatible withTPS62160andTPS62125Available in a 2-mm × 2-mm 8-Pin WSON PackageCreate a Custom Design using the TPS62170 with theWEBENCH® Power Designer
Description
AI
The TPS6217x device family are easy to use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by utilization of the DCS-Control™ topology.
With its wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 0.5-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).
Power sequencing is also possible by configuring the enable and open-drain power good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2 µA.
The device, available in adjustable and fixed output voltage versions, is packaged in a 2-mm × 2-mm 8-pin WSON package (DSG).
The TPS6217x device family are easy to use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by utilization of the DCS-Control™ topology.
With its wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 0.5-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).
Power sequencing is also possible by configuring the enable and open-drain power good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2 µA.
The device, available in adjustable and fixed output voltage versions, is packaged in a 2-mm × 2-mm 8-pin WSON package (DSG).