OPA316-Q1 Series
Automotive-grade, single, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO op amp
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive-grade, single, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO op amp
| Part | Voltage - Supply Span (Min) [Min] | Voltage - Supply Span (Max) [Max] | Voltage - Input Offset | Output Type | Mounting Type | Amplifier Type | Slew Rate | Package / Case | Grade | Number of Circuits | Current - Supply | Supplier Device Package | Current - Output / Channel | Gain Bandwidth Product | Qualification | Operating Temperature [Max] | Operating Temperature [Min] | Current - Input Bias |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments OPA316QDBVTQ1 | 1.8 V | 5.5 V | 500 çV | Rail-to-Rail | Surface Mount | General Purpose | 6 V/çs | SC-74A, SOT-753 | Automotive | 1 | 400 çA | SOT-23-5 | 50 mA | 10 MHz | AEC-Q100 | 125 °C | -40 °C | 5 pA |
Texas Instruments OPA316QDBVRQ1 | 1.8 V | 5.5 V | 500 çV | Rail-to-Rail | Surface Mount | General Purpose | 6 V/çs | SC-74A, SOT-753 | Automotive | 1 | 400 çA | SOT-23-5 | 50 mA | 10 MHz | AEC-Q100 | 125 °C | -40 °C | 5 pA |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature RangeDevice HBM ESD Classification Level 3ADevice CDM ESD Classification Level C5Unity-Gain Bandwidth: 10 MHzLow IQ: 400 µA/chWide Supply Range: 1.8 V to 5.5 VLow Noise: 11 nV/√Hzat 1 kHzLow Input Bias Current: ±5 pAOffset Voltage: ±0.5 mVUnity-Gain StableInternal RFI-EMI FilterExtended Temperature Range: –40°C to +125°CQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature RangeDevice HBM ESD Classification Level 3ADevice CDM ESD Classification Level C5Unity-Gain Bandwidth: 10 MHzLow IQ: 400 µA/chWide Supply Range: 1.8 V to 5.5 VLow Noise: 11 nV/√Hzat 1 kHzLow Input Bias Current: ±5 pAOffset Voltage: ±0.5 mVUnity-Gain StableInternal RFI-EMI FilterExtended Temperature Range: –40°C to +125°C
Description
AI
The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hzat 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.
The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).
These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V). This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.
The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hzat 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.
The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).
These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V). This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.