
UCC28250 Series
Manufacturer: Texas Instruments
EVAL MODULE FOR UCC28250-501
| Part | Supplied Contents | Total Output Count | Output Type | Isolated Output Count | Power - Output | Board Type | Utilized IC / Part | Voltage - Output | Contents | Frequency - Switching | Voltage - Input (Maximum) | Voltage - Input (Minimum) | Current - Output | Main Purpose | Regulator Topology | Control Features | Synchronous Rectifier | Voltage - Supply (Vcc/Vdd) Maximum | Voltage - Supply (Vcc/Vdd) Minimum | Operating Temperature (Max) | Operating Temperature (Min) | Number of Outputs | Package Length | Package Name | Package Width | Frequency - Switching (Min) | Frequency - Switching (Max) | Output Configuration | Topology | Mounting Type | Clock Sync | Output Phases | Function | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments | Board(s) | 1 | Isolated | 1 | 75 W | Fully Populated | UCC28250 | 3.3 V | Board | 1 MHz | 72 V | 36 V | 23 A | DC/DC Step Down | Buck | |||||||||||||||||||
Texas Instruments | PWM Signal | Current Limit Enable Frequency Control Ramp Soft Start | Yes | 17 V | 4.7 V | 125 °C | -40 °C | 2 | 0.173 in | 20-TSSOP | 4.4 mm | 85 kHz | 1.15 MHz | Positive | Full-Bridge Half-Bridge Push-Pull | Surface Mount | No | 1 | Step-Down Step-Up | |||||||||||||||
Texas Instruments | Board(s) | 1 | Isolated | 1 | 100 W | Fully Populated | UCC28250 | 3.3 V | Board | 200 kHz | 75 V | 36 V | 30 A | DC/DC Step Down | Buck | |||||||||||||||||||
Texas Instruments | PWM Signal | Current Limit Enable Frequency Control Ramp Soft Start | Yes | 17 V | 4.7 V | 125 °C | -40 °C | 2 | 4 mm | 20-QFN | 4 mm | 85 kHz | 1.15 MHz | Positive | Full-Bridge Half-Bridge Push-Pull | Surface Mount | No | 1 | Step-Down Step-Up | 20-VFQFN Exposed Pad | ||||||||||||||
Texas Instruments | PWM Signal | Current Limit Enable Frequency Control Ramp Soft Start | Yes | 17 V | 4.7 V | 125 °C | -40 °C | 2 | 0.173 in | 20-TSSOP | 4.4 mm | 85 kHz | 1.15 MHz | Positive | Full-Bridge Half-Bridge Push-Pull | Surface Mount | No | 1 | Step-Down Step-Up | |||||||||||||||
Texas Instruments | PWM Signal | Current Limit Enable Frequency Control Ramp Soft Start | Yes | 17 V | 4.7 V | 125 °C | -40 °C | 2 | 4 mm | 20-QFN | 4 mm | 85 kHz | 1.15 MHz | Positive | Full-Bridge Half-Bridge Push-Pull | Surface Mount | No | 1 | Step-Down Step-Up | 20-VFQFN Exposed Pad |