SN75HVD06 Series
High-Output RS-485 Transceiver
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
High-Output RS-485 Transceiver
| Part | Protocol | Operating Temperature [Max] | Operating Temperature [Min] | Data Rate | Package / Case | Package / Case | Mounting Type | Duplex | Receiver Hysteresis | Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments SN75HVD06D | RS422, RS485 | 70 ░C | 0 °C | 10 Mbps | 3.9 mm | 8-SOIC | Surface Mount | Half | 35 mV | Transceiver | 5.5 V | 4.5 V | 8-SOIC |
Texas Instruments SN75HVD06DR | RS422, RS485 | 70 ░C | 0 °C | 10 Mbps | 3.9 mm | 8-SOIC | Surface Mount | Half | 35 mV | Transceiver | 5.5 V | 4.5 V | 8-SOIC |
Key Features
• Minimum differential output voltage of 2.5 V Into a 54-Ω loadOpen-circuit, short-circuit, and idle-bus failsafe receiver1/8thUnit-load option available (Up to 256 nodes on the bus)Bus-pin ESD protection exceeds 16 kV HBMDriver output slew rate control optionsElectrically compatible with ANSI TIA/EIA-485-A standardLow-current standby mode: 1 µA typicalGlitch-free power-up and power-down protection for hot-plugging applicationsPin compatible with industry standard SN75176Minimum differential output voltage of 2.5 V Into a 54-Ω loadOpen-circuit, short-circuit, and idle-bus failsafe receiver1/8thUnit-load option available (Up to 256 nodes on the bus)Bus-pin ESD protection exceeds 16 kV HBMDriver output slew rate control optionsElectrically compatible with ANSI TIA/EIA-485-A standardLow-current standby mode: 1 µA typicalGlitch-free power-up and power-down protection for hot-plugging applicationsPin compatible with industry standard SN75176
Description
AI
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.
The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.
The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.