AM26LV32E Series
Low-Voltage High-Speed Quadruple Differential Line Receiver With +/-15-kV IEC ESD
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Low-Voltage High-Speed Quadruple Differential Line Receiver With +/-15-kV IEC ESD
| Part | Protocol | Receiver Hysteresis | Mounting Type | Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Package / Case | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Supplier Device Package | Operating Temperature [Min] | Operating Temperature [Max] | Package / Case [x] | Package / Case [x] | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments AM26LV32EINSR | RS422, RS485 | 35 mV | Surface Mount | Receiver | 3.6 V | 3 V | 16-SOIC (0.209", 5.30mm Width) | 0 | 4 | 16-SO | -40 °C | 85 °C | |||
Texas Instruments AM26LV32EIPWR | RS422, RS485 | 35 mV | Surface Mount | Receiver | 3.6 V | 3 V | 16-TSSOP | 0 | 4 | 16-TSSOP | -40 °C | 85 °C | 0.173 " | 4.4 mm | |
Texas Instruments AM26LV32EIRGYR | RS422, RS485 | 35 mV | Surface Mount | Receiver | 3.6 V | 3 V | 16-VFQFN Exposed Pad | 0 | 4 | 16-VQFN (4x3.5) | -40 °C | 85 °C | |||
Texas Instruments AM26LV32EIDR | RS422, RS485 | 35 mV | Surface Mount | Receiver | 3.6 V | 3 V | 16-SOIC | 0 | 4 | 16-SOIC | -40 °C | 85 °C | 0.154 in, 3.9 mm Width |
Key Features
• Meets or exceeds standard TIA/EIA-422-B and ITU recommendation V.11Operates from a single 3.3-V power supplySwitching rates up to 32 MHzESD Protection for RS422 bus pins (See ESD Ratings)Low power dissipation: 27 mW typicalOpen circuit fail-safe±7-V Common-mode input voltage range with ±200-mV sensitivityAccepts 5-V logic inputs with 3.3-V supply (enable inputs)Input hysteresis: 35 mV typicalPin-to-pin compatible with AM26C32, AM26LS32I off Supports partial-power-down mode operationMeets or exceeds standard TIA/EIA-422-B and ITU recommendation V.11Operates from a single 3.3-V power supplySwitching rates up to 32 MHzESD Protection for RS422 bus pins (See ESD Ratings)Low power dissipation: 27 mW typicalOpen circuit fail-safe±7-V Common-mode input voltage range with ±200-mV sensitivityAccepts 5-V logic inputs with 3.3-V supply (enable inputs)Input hysteresis: 35 mV typicalPin-to-pin compatible with AM26C32, AM26LS32I off Supports partial-power-down mode operation
Description
AI
The AM26LV32E device consists of quadruple differential line receivers with 3-state outputs. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system. The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using I off. I off circuitry disables the outputs, preventing damaging current back-flow through the device when it is powered down.
The AM26LV32E device consists of quadruple differential line receivers with 3-state outputs. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system. The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using I off. I off circuitry disables the outputs, preventing damaging current back-flow through the device when it is powered down.