V62/14608 Series

Enhanced product 25-MHz MCU with 256-KB flash, 16-KB SRAM, 12-bit ADC, DMA, UART/SPI/I2C, timer

Catalog(0 parts)

Part
No parts found Try adjusting your search criteria

Key Features

• Low Supply Voltage Range:3.6 V Down to 1.8 VUltralow Power ConsumptionActive Mode (AM): All System Clocks Active230 µA/MHz at 8 MHz, 3.0 V, Flash ProgramExecution (Typical) 110 µA/MHz at 8 MHz,3.0 V, RAM Program Execution (Typical)Standby Mode (LPM3):Real-Time Clock With Crystal, Watchdog,and Supply Supervisor Operational, Full RAMRetention, Fast Wake-Up:1.7 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)Low-Power Oscillator (VLO), General-Purpose Counter,Watchdog, and Supply SupervisorOperational, Full RAM Retention, Fast Wake-Up:1.2 µA at 3.0 V (Typical)Off Mode (LPM4):Full RAM Retention, Supply Supervisor Operational,Fast Wake-Up: 1.2 µA at 3.0 V (Typical)Shutdown Mode (LPM4.5):0.1 µA at 3.0 V (Typical)Wake-Up From Standby Mode in 3.5 µs (Typical)16-Bit RISC ArchitectureExtended MemoryUp to 25-MHz System ClockFlexible Power Management SystemFully Integrated LDO With Programmable RegulatedCore Supply VoltageSupply Voltage Supervision, Monitoring, and BrownoutUnified Clock SystemFLL Control Loop for Frequency StabilizationLow-Power/Low-Frequency Internal Clock Source (VLO)Low-Frequency Trimmed Internal Reference Source (REFO)32-kHz CrystalsHigh-Frequency Crystals up to 32 MHz(1)16-Bit Timer TA0, Timer_A With Five Capture/CompareRegisters16-Bit Timer TA1, Timer_A With Three Capture/CompareRegisters16-Bit Timer TB0, Timer_B With Seven Capture/CompareShadow RegistersUp to Four Universal Serial Communication InterfacesUSCI_A0, USCI_A1, USCI_A2, and USCI_A3 Each SupportingEnhanced UART supporting Auto-Baudrate DetectionIrDA Encoder and DecoderSynchronous SPIUSCI_B0, USCI_B1, USCI_B2, and USCI_B3 Each SupportingI2CTMSynchronous SPI12-Bit Analog-to-Digital (A/D) ConverterInternal ReferenceSample-and-HoldAutoscan Feature14 External Channels, 2 Internal ChannelsHardware Multiplier Supporting 32-Bit OperationsSerial Onboard Programming, No External ProgrammingVoltage NeededThree Channel Internal DMABasic Timer With Real-Time Clock FeatureFor Complete Module Descriptions, See the (SLAU208)Wide Operational Range: –40°C to 125°C (Q Temp),–55°C to 125°C (M Temp) (Some Noted ParametersSpecified for –40°C to 85°C Only)Supports Defense, Aerospace, and Medical ApplicationsControlled BaselineOne Assembly and Test SiteOne Fabrication SiteAvailable in Extended (–55°C to 125°C) Temperature RangeExtended Product Life CycleExtended Product-Change NotificationProduct Traceability(1)Use of crystals is not ensured above 85°C for both 32-kHz and high frequency crystals.All trademarks are the property of their respective owners.Low Supply Voltage Range:3.6 V Down to 1.8 VUltralow Power ConsumptionActive Mode (AM): All System Clocks Active230 µA/MHz at 8 MHz, 3.0 V, Flash ProgramExecution (Typical) 110 µA/MHz at 8 MHz,3.0 V, RAM Program Execution (Typical)Standby Mode (LPM3):Real-Time Clock With Crystal, Watchdog,and Supply Supervisor Operational, Full RAMRetention, Fast Wake-Up:1.7 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)Low-Power Oscillator (VLO), General-Purpose Counter,Watchdog, and Supply SupervisorOperational, Full RAM Retention, Fast Wake-Up:1.2 µA at 3.0 V (Typical)Off Mode (LPM4):Full RAM Retention, Supply Supervisor Operational,Fast Wake-Up: 1.2 µA at 3.0 V (Typical)Shutdown Mode (LPM4.5):0.1 µA at 3.0 V (Typical)Wake-Up From Standby Mode in 3.5 µs (Typical)16-Bit RISC ArchitectureExtended MemoryUp to 25-MHz System ClockFlexible Power Management SystemFully Integrated LDO With Programmable RegulatedCore Supply VoltageSupply Voltage Supervision, Monitoring, and BrownoutUnified Clock SystemFLL Control Loop for Frequency StabilizationLow-Power/Low-Frequency Internal Clock Source (VLO)Low-Frequency Trimmed Internal Reference Source (REFO)32-kHz CrystalsHigh-Frequency Crystals up to 32 MHz(1)16-Bit Timer TA0, Timer_A With Five Capture/CompareRegisters16-Bit Timer TA1, Timer_A With Three Capture/CompareRegisters16-Bit Timer TB0, Timer_B With Seven Capture/CompareShadow RegistersUp to Four Universal Serial Communication InterfacesUSCI_A0, USCI_A1, USCI_A2, and USCI_A3 Each SupportingEnhanced UART supporting Auto-Baudrate DetectionIrDA Encoder and DecoderSynchronous SPIUSCI_B0, USCI_B1, USCI_B2, and USCI_B3 Each SupportingI2CTMSynchronous SPI12-Bit Analog-to-Digital (A/D) ConverterInternal ReferenceSample-and-HoldAutoscan Feature14 External Channels, 2 Internal ChannelsHardware Multiplier Supporting 32-Bit OperationsSerial Onboard Programming, No External ProgrammingVoltage NeededThree Channel Internal DMABasic Timer With Real-Time Clock FeatureFor Complete Module Descriptions, See the (SLAU208)Wide Operational Range: –40°C to 125°C (Q Temp),–55°C to 125°C (M Temp) (Some Noted ParametersSpecified for –40°C to 85°C Only)Supports Defense, Aerospace, and Medical ApplicationsControlled BaselineOne Assembly and Test SiteOne Fabrication SiteAvailable in Extended (–55°C to 125°C) Temperature RangeExtended Product Life CycleExtended Product-Change NotificationProduct Traceability(1)Use of crystals is not ensured above 85°C for both 32-kHz and high frequency crystals.All trademarks are the property of their respective owners.

Description

The MSP430F5438A-EP is an ultralow-power microcontroller. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in 3.5 µs (typical). The MSP430F5438A-EP is a microcontroller configuration with three 16-bit timers, a high performance 12-bit analog-to-digital (A/D) converter, up to four universal serial communication interfaces (USCI), hardware multiplier, DMA, real-time clock module with alarm capabilities, and up to 87 I/O pins. Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, and hand-held meters. The MSP430F5438A-EP is an ultralow-power microcontroller. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in 3.5 µs (typical). The MSP430F5438A-EP is a microcontroller configuration with three 16-bit timers, a high performance 12-bit analog-to-digital (A/D) converter, up to four universal serial communication interfaces (USCI), hardware multiplier, DMA, real-time clock module with alarm capabilities, and up to 87 I/O pins. Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, and hand-held meters.