Catalog(2 parts)
| Part | Frequency - Switching▲▼ | Frequency - Switching▲▼ | Fault Protection | Power (Watts)▲▼ | Supplier Device Package | Output Isolation | Voltage - Supply (Vcc/Vdd)▲▼ | Voltage - Supply (Vcc/Vdd)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Mounting Type | Internal Switch(s)▲▼ | Package / Case▲▼ | Package / Case | Voltage - Start Up▲▼ | Topology | Utilized IC / Part | Board Type | Voltage - Output▲▼ | Supplied Contents | Regulator Topology | Voltage - Input▲▼ | Voltage - Input▲▼ | Power - Output▲▼ | Current - Output▲▼ | Main Purpose | Outputs and Type | Outputs and Type▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
30000 Hz | 133000 Hz | Current Limiting, Over Temperature, Over Voltage | 65 W | 8-SOIC | Isolated | 25 V | 8 V | 150 °C | -40 °C | Surface Mount | 0.003899999894201755 m | 8-SOIC | 10.199999809265137 V | Flyback | ||||||||||||||
UCC28610 | Fully Populated | 12 V | Board(s) | Flyback | 85 Vrms | 265 Vrms | 25 W | 2.0999999046325684 A | AC/DC, Primary Side | Isolated | 1 ul |
Key Features
• Cascoded Configuration Allows Fully IntegratedCurrent Control Without External Sense ResistorFast Start Up With Low Standby Power Achievedby Cascode ConfigurationFrequency and Peak Current Modulation forOptimum Efficiency Over Entire Operating RangeGreen-Mode (GM) Burst Switching PacketsImprove No-Load EfficiencyAdvanced Overcurrent Protection Limits RMSInput and Output CurrentsThermal ShutdownTimed Overload With Retry or Latch-OffResponseProgrammable Opto-Less Output OvervoltageProtectionFast Latched Fault Recovery8-Pin SOIC Package and 8-Pin PDIP Lead-FreePackagesCascoded Configuration Allows Fully IntegratedCurrent Control Without External Sense ResistorFast Start Up With Low Standby Power Achievedby Cascode ConfigurationFrequency and Peak Current Modulation forOptimum Efficiency Over Entire Operating RangeGreen-Mode (GM) Burst Switching PacketsImprove No-Load EfficiencyAdvanced Overcurrent Protection Limits RMSInput and Output CurrentsThermal ShutdownTimed Overload With Retry or Latch-OffResponseProgrammable Opto-Less Output OvervoltageProtectionFast Latched Fault Recovery8-Pin SOIC Package and 8-Pin PDIP Lead-FreePackages
Description
AI
The UCC28610 brings a new level of performance and reliability to the AC and DC consumer power supply solution.
A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation over the entire operating range. Combined with a cascoded architecture, these innovations result in efficiency, reliability, and system cost improvements over a conventional flyback architecture.
The UCC28610 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. Overload fault response is user-programmed for retry or latch-off mode. Additional protection features include output overvoltage detection, programmable maximum on-time, and thermal shutdown.
The UCC28610 brings a new level of performance and reliability to the AC and DC consumer power supply solution.
A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation over the entire operating range. Combined with a cascoded architecture, these innovations result in efficiency, reliability, and system cost improvements over a conventional flyback architecture.
The UCC28610 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. Overload fault response is user-programmed for retry or latch-off mode. Additional protection features include output overvoltage detection, programmable maximum on-time, and thermal shutdown.