TPS7A2550 Series
300-mA, 18-V, ultra-low-IQ, high-accuracy, adjustable low-dropout voltage regulator with power good
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
300-mA, 18-V, ultra-low-IQ, high-accuracy, adjustable low-dropout voltage regulator with power good
| Part | Protection Features | Number of Regulators | Current - Quiescent (Iq) | Voltage - Input (Max) [Max] | Voltage - Output (Min/Fixed) | Supplier Device Package | Current - Output | Voltage Dropout (Max) | PSRR [Max] | PSRR [Min] | Control Features | Output Type | Mounting Type | Output Configuration | Operating Temperature [Max] | Operating Temperature [Min] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS7A2550DRVR | Over Current, Over Temperature | 1 | 4.5 µA | 18 V | 5 V | 6-WSON (2x2) | 300 mA | 0.21 V | 75 dB | 52 dB | Enable, Power Good | 27.03 °C/W | Surface Mount | Positive | 125 ¯C | -40 °C |
Key Features
• Ultra-low IQ: 2 µAInput voltage: 2.4 V to 18 VOutput voltage options available:Fixed: 1.25 V to 5.0 VAdjustable: 1.24 V to 17.66 V1% accuracy over temperatureLow dropout: 340 mV (max) at 300 mAOpen-drain, power-good outputThermal shutdown and overcurrent protectionActive overshoot pulldownOperating junction temperature: –40°C to +125°CStable with 1-µF output capacitorsPackage: 6-pin WSONUltra-low IQ: 2 µAInput voltage: 2.4 V to 18 VOutput voltage options available:Fixed: 1.25 V to 5.0 VAdjustable: 1.24 V to 17.66 V1% accuracy over temperatureLow dropout: 340 mV (max) at 300 mAOpen-drain, power-good outputThermal shutdown and overcurrent protectionActive overshoot pulldownOperating junction temperature: –40°C to +125°CStable with 1-µF output capacitorsPackage: 6-pin WSON
Description
AI
The TPS7A25 low-dropout (LDO) linear voltage regulator introduces a combination of a 2.4-V to 18-V input voltage range with very-low quiescent current (IQ). These features help modern appliances meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.
The TPS7A25 is available in both fixed and adjustable versions. For more flexibility or higher output voltages, the adjustable version uses feedback resistors to set the output voltage from 1.24 V to 17.64 V. Both versions have a 1% output regulation accuracy that provides precision regulation for most microcontroller (MCU) references.
The TPS7A25 LDO operates more efficiently than standard linear regulators because the maximum dropout voltage is less than 340 mV at 300 mA of current. This maximum dropout voltage allows for 92.5% efficiency from a 5.4-V input voltage (VIN) to a 5.0-V output voltage (VOUT).
The power-good (PG) indicator can be used to either hold an MCU in reset until power is good, or for sequencing. The PG pin is an open-drain output; therefore, the pin is easily level-shifted for monitoring by a rail other than VOUT. The built-in current limit and thermal shutdown help protect the regulator in the event of a load short or fault.
For a higher output current alternative, consider theTPS7A26.
The TPS7A25 low-dropout (LDO) linear voltage regulator introduces a combination of a 2.4-V to 18-V input voltage range with very-low quiescent current (IQ). These features help modern appliances meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.
The TPS7A25 is available in both fixed and adjustable versions. For more flexibility or higher output voltages, the adjustable version uses feedback resistors to set the output voltage from 1.24 V to 17.64 V. Both versions have a 1% output regulation accuracy that provides precision regulation for most microcontroller (MCU) references.
The TPS7A25 LDO operates more efficiently than standard linear regulators because the maximum dropout voltage is less than 340 mV at 300 mA of current. This maximum dropout voltage allows for 92.5% efficiency from a 5.4-V input voltage (VIN) to a 5.0-V output voltage (VOUT).
The power-good (PG) indicator can be used to either hold an MCU in reset until power is good, or for sequencing. The PG pin is an open-drain output; therefore, the pin is easily level-shifted for monitoring by a rail other than VOUT. The built-in current limit and thermal shutdown help protect the regulator in the event of a load short or fault.
For a higher output current alternative, consider theTPS7A26.