MSP430AFE232 Series
12 MHz metering AFE with 2 24-bit Sigma-Delta ADCs, 8KB Flash, 512B RAM
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
12 MHz metering AFE with 2 24-bit Sigma-Delta ADCs, 8KB Flash, 512B RAM
| Part | Connectivity [custom] | Data Converters [custom] | Data Converters [custom] | Oscillator Type | Supplier Device Package | Peripherals | Program Memory Type | Core Size | Core Processor | Number of I/O | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Speed | RAM Size [custom] | RAM Size [custom] | Mounting Type | Package / Case [y] | Package / Case [y] | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430AFE232IPW | SPI, UART/USART | 24 | 2 | Internal | 24-TSSOP | Brown-out Detect/Reset, PWM, WDT | FLASH | 16-Bit | MSP430 CPU16 | 11 I/O | 85 °C | -40 °C | 3.6 V | 1.8 V | 12 MHz | 8 | 512 | Surface Mount | 4.4 mm | 0.173 " | 24-TSSOP |
Texas Instruments MSP430AFE232IPWR | SPI, UART/USART | 24 | 2 | Internal | 24-TSSOP | Brown-out Detect/Reset, PWM, WDT | FLASH | 16-Bit | MSP430 CPU16 | 11 I/O | 85 °C | -40 °C | 3.6 V | 1.8 V | 12 MHz | 8 | 512 | Surface Mount | 4.4 mm | 0.173 " | 24-TSSOP |
Key Features
• Low Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 220 µA at 1 MHz, 2.2 VStandby Mode: 0.5 µAOff Mode (RAM Retention): 0.1 µAFive Power-Saving ModesUltra-Fast Wake-up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, up to 12-MHz System ClockBasic Clock Module ConfigurationsInternal Frequencies up to 12 MHz With Two Calibrated FrequenciesInternal Very-Low-Power Low-Frequency (LF) OscillatorHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceUp to Three 24-Bit Sigma-Delta Analog-to-Digital Converters (ADCs) With Differential PGA Inputs16-Bit Timer_A With Three Capture/Compare RegistersSerial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software16-Bit Hardware MultiplierBrownout DetectorSupply Voltage Supervisor and Monitor With Programmable Level DetectionSerial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security FuseOn-Chip Emulation ModuleDevice Comparison Summarizes the Available Family MembersFor Complete Module Descriptions, See theMSP430x2xx Family User’s GuideLow Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 220 µA at 1 MHz, 2.2 VStandby Mode: 0.5 µAOff Mode (RAM Retention): 0.1 µAFive Power-Saving ModesUltra-Fast Wake-up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, up to 12-MHz System ClockBasic Clock Module ConfigurationsInternal Frequencies up to 12 MHz With Two Calibrated FrequenciesInternal Very-Low-Power Low-Frequency (LF) OscillatorHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceUp to Three 24-Bit Sigma-Delta Analog-to-Digital Converters (ADCs) With Differential PGA Inputs16-Bit Timer_A With Three Capture/Compare RegistersSerial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software16-Bit Hardware MultiplierBrownout DetectorSupply Voltage Supervisor and Monitor With Programmable Level DetectionSerial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security FuseOn-Chip Emulation ModuleDevice Comparison Summarizes the Available Family MembersFor Complete Module Descriptions, See theMSP430x2xx Family User’s Guide
Description
AI
The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 1 µs.
The MSP430AFE2x3 devices are ultra-low-power mixed signal microcontrollers integrating three independent 24-bit sigma-delta ADCs, one 16-bit timer, one 16-bit hardware multiplier, USART communication interface, watchdog timer, and 11 I/O pins.
The MSP430AFE2x2 devices are identical to the MSP430AFE2x3, except that there are only two 24-bit sigma-delta ADCs integrated.
The MSP430AFE2x1 devices are identical to the MSP430AFE2x3, except that there is only one 24-bit sigma-delta ADC integrated.
The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 1 µs.
The MSP430AFE2x3 devices are ultra-low-power mixed signal microcontrollers integrating three independent 24-bit sigma-delta ADCs, one 16-bit timer, one 16-bit hardware multiplier, USART communication interface, watchdog timer, and 11 I/O pins.
The MSP430AFE2x2 devices are identical to the MSP430AFE2x3, except that there are only two 24-bit sigma-delta ADCs integrated.
The MSP430AFE2x1 devices are identical to the MSP430AFE2x3, except that there is only one 24-bit sigma-delta ADC integrated.