Catalog(3 parts)
| Part | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Mounting Type | Package / Case▲▼ | Package / Case▲▼ | Package / Case | Current - Output High, Low▲▼ | Logic Type | Output Type | Number of Elements▲▼ | Number of Bits per Element▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments SN74BCT125ADBuffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-SOIC | 5.5 V | 4.5 V | Surface Mount | 0.003899999894201755 m | 0.003911599982529879 m | 14-SOIC | 0.014999999664723871 A, 0.06400000303983688 A | Buffer, Non-Inverting | 3-State | 4 ul | 1 ul | 70 °C | 0 °C |
Texas Instruments SN74BCT125ADRBuffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-SOIC | 5.5 V | 4.5 V | Surface Mount | 0.003899999894201755 m | 0.003911599982529879 m | 14-SOIC | 0.014999999664723871 A, 0.06400000303983688 A | Buffer, Non-Inverting | 3-State | 4 ul | 1 ul | 70 °C | 0 °C |
Texas Instruments SN74BCT125ANBuffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-PDIP | 5.5 V | 4.5 V | Through Hole | 0.007619999814778566 m | 0.007619999814778566 m | 14-DIP | 0.014999999664723871 A, 0.06400000303983688 A | Buffer, Non-Inverting | 3-State | 4 ul | 1 ul | 70 °C | 0 °C |
Key Features
• Operating Voltage Range of 4.5 V to 5.5 VState-of-the-Art BiCMOS Design Significantly Reduces ICCZ3-State Outputs Drive Bus Lines or BufferMemory Address RegistersOperating Voltage Range of 4.5 V to 5.5 VState-of-the-Art BiCMOS Design Significantly Reduces ICCZ3-State Outputs Drive Bus Lines or BufferMemory Address Registers
Description
AI
The ’BCT125A bus buffers feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The ’BCT125A bus buffers feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.