MSP430FR5739-EP Series
MSP430FR5739 24 MHz ULP microcontroller with 16 KB FRAM, 1 KB SRAM, 32 IO, 10-bit ADC & comparator
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
MSP430FR5739 24 MHz ULP microcontroller with 16 KB FRAM, 1 KB SRAM, 32 IO, 10-bit ADC & comparator
| Part | Operating Temperature [Min] | Operating Temperature [Max] | RAM Size | Oscillator Type | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Mounting Type | Core Processor | Program Memory Size | Supplier Device Package | Connectivity | Data Converters [custom] | Data Converters [custom] | Core Size | Package / Case | Program Memory Type | Speed | Number of I/O |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments V62/14644-01XE | -55 C | 85 C | 1K x 8 | Internal | 3.6 V | 2 V | Surface Mount | MSP430 | 16 KB | 40-VQFN (6x6) | I2C, IrDA, LINbus, SCI, SPI, UART/USART | 10b | 14 | 16-Bit | 40-VFQFN Exposed Pad | FRAM | 24 MHz | 32 I/O |
Texas Instruments M430FR5739SRHATEP | -55 C | 85 C | 1K x 8 | Internal | 3.6 V | 2 V | Surface Mount | MSP430 | 16 KB | 40-VQFN (6x6) | I2C, IrDA, LINbus, SCI, SPI, UART/USART | 10b | 14 | 16-Bit | 40-VFQFN Exposed Pad | FRAM | 24 MHz | 32 I/O |
Key Features
• Embedded Microcontroller16-Bit RISC Architecture up to 24-MHz ClockWide Supply Voltage Range (2 to 3.6 V)–55°C to 85°C OperationOptimized Ultra-Low-Power ModesActive Mode: 81.4 µA/MHz (Typical)Standby (LPM3 With VLO): 6.3 µA (Typical)Real-Time Clock (LPM3.5 With Crystal): 1.5 µA(Typical)Shutdown (LPM4.5): 0.32 µA (Typical)Ultra-Low-Power Ferroelectric RAM (FRAM)Up to 16KB of Nonvolatile MemoryUltra-Low-Power WritesFast Write at 125 ns per Word (16KB in 1 ms)Built-In Error Correction Coding (ECC) andMemory Protection Unit (MPU)Universal Memory = Program + Data + Storage1015Write Cycle EnduranceRadiation Resistant and NonmagneticIntelligent Digital Peripherals32-Bit HardwareMultiplier (MPY)Three-Channel Internal DMAReal-Time Clock (RTC) With Calendar andAlarm FunctionsFive 16-Bit Timers With up to ThreeCapture/Compare Registers16-Bit Cyclic Redundancy Checker(CRC)High-Performance Analog16-Channel Analog Comparator With VoltageReference and Programmable Hysteresis14-Channel 10-Bit Analog-to-Digital ConverterWith Internal Reference and Sample-and-Hold200 ksps at 100-µA ConsumptionEnhanced Serial CommunicationeUSCI_A0 and eUSCI_A1 Support:UART With Automatic Baud-Rate DetectionIrDA Encode and DecodeSPI at Rates up to 10 MbpseUSCI_B0 Supports:I2C With Multiple Slave AddressingSPI at Rates up to 10 MbpsHardware UART Bootstrap Loader (BSL)Power Management SystemFully Integrated LDOSupply Voltage Supervisor for Core andSupply Voltages With Reset CapabilityAlways-On Zero-Power Brownout DetectionSerial On-Board Programming With No ExternalVoltage NeededFlexible Clock SystemFixed-Frequency DCO With Six SelectableFactory-Trimmed Frequencies (Device Dependent)Low-Power Low-Frequency Internal ClockSource (VLO)32-kHz Crystals (LFXT)High-Frequency Crystals (HFXT)Development Tools and SoftwareFree Professional Development Environment(Code Composer Studio IDE)Low-Cost Full-Featured Kit(MSP-EXP430FR5739)Full Development Kit (MSP-FET430U40A)Target Board (MSP-TS430RHA40A)Family MembersVariants and Available Packages Summarized inFor Complete Module Descriptions, See theMSP430FR57xx Family User‘s Guide(SLAU272)Supports Defense, Aerospace, and Medical ApplicationsControlled BaselineOne Assembly and Test SiteOne Fabrication SiteAvailable in Extended (–55°C to 85°C) Temperature Range(1)Extended Product Life CycleExtended Product-Change NotificationProduct TraceabilityEmbedded Microcontroller16-Bit RISC Architecture up to 24-MHz ClockWide Supply Voltage Range (2 to 3.6 V)–55°C to 85°C OperationOptimized Ultra-Low-Power ModesActive Mode: 81.4 µA/MHz (Typical)Standby (LPM3 With VLO): 6.3 µA (Typical)Real-Time Clock (LPM3.5 With Crystal): 1.5 µA(Typical)Shutdown (LPM4.5): 0.32 µA (Typical)Ultra-Low-Power Ferroelectric RAM (FRAM)Up to 16KB of Nonvolatile MemoryUltra-Low-Power WritesFast Write at 125 ns per Word (16KB in 1 ms)Built-In Error Correction Coding (ECC) andMemory Protection Unit (MPU)Universal Memory = Program + Data + Storage1015Write Cycle EnduranceRadiation Resistant and NonmagneticIntelligent Digital Peripherals32-Bit HardwareMultiplier (MPY)Three-Channel Internal DMAReal-Time Clock (RTC) With Calendar andAlarm FunctionsFive 16-Bit Timers With up to ThreeCapture/Compare Registers16-Bit Cyclic Redundancy Checker(CRC)High-Performance Analog16-Channel Analog Comparator With VoltageReference and Programmable Hysteresis14-Channel 10-Bit Analog-to-Digital ConverterWith Internal Reference and Sample-and-Hold200 ksps at 100-µA ConsumptionEnhanced Serial CommunicationeUSCI_A0 and eUSCI_A1 Support:UART With Automatic Baud-Rate DetectionIrDA Encode and DecodeSPI at Rates up to 10 MbpseUSCI_B0 Supports:I2C With Multiple Slave AddressingSPI at Rates up to 10 MbpsHardware UART Bootstrap Loader (BSL)Power Management SystemFully Integrated LDOSupply Voltage Supervisor for Core andSupply Voltages With Reset CapabilityAlways-On Zero-Power Brownout DetectionSerial On-Board Programming With No ExternalVoltage NeededFlexible Clock SystemFixed-Frequency DCO With Six SelectableFactory-Trimmed Frequencies (Device Dependent)Low-Power Low-Frequency Internal ClockSource (VLO)32-kHz Crystals (LFXT)High-Frequency Crystals (HFXT)Development Tools and SoftwareFree Professional Development Environment(Code Composer Studio IDE)Low-Cost Full-Featured Kit(MSP-EXP430FR5739)Full Development Kit (MSP-FET430U40A)Target Board (MSP-TS430RHA40A)Family MembersVariants and Available Packages Summarized inFor Complete Module Descriptions, See theMSP430FR57xx Family User‘s Guide(SLAU272)Supports Defense, Aerospace, and Medical ApplicationsControlled BaselineOne Assembly and Test SiteOne Fabrication SiteAvailable in Extended (–55°C to 85°C) Temperature Range(1)Extended Product Life CycleExtended Product-Change NotificationProduct Traceability
Description
AI
The Texas Instruments MSP430FR573x family of ultra-low-power microcontrollers consists of multiple devices that feature embedded FRAM nonvolatile memory, ultra-low-power 16-bit MSP430™ CPU, and different peripherals targeted for various applications. The architecture, FRAM, and peripherals, combined with seven low-power modes, are optimized to achieve extended battery life in portable and wireless sensing applications. FRAM is a new nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption. Peripherals include a 10-bit analog-to-digital converter (ADC), a 16-channel comparator with voltage reference generation and hysteresis capabilities, three enhanced serial channels capable of I2C, SPI, or UART protocols, an internal DMA, a hardware multiplier, an RTC, five 16-bit timers, and digital I/Os.
The Texas Instruments MSP430FR573x family of ultra-low-power microcontrollers consists of multiple devices that feature embedded FRAM nonvolatile memory, ultra-low-power 16-bit MSP430™ CPU, and different peripherals targeted for various applications. The architecture, FRAM, and peripherals, combined with seven low-power modes, are optimized to achieve extended battery life in portable and wireless sensing applications. FRAM is a new nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption. Peripherals include a 10-bit analog-to-digital converter (ADC), a 16-channel comparator with voltage reference generation and hysteresis capabilities, three enhanced serial channels capable of I2C, SPI, or UART protocols, an internal DMA, a hardware multiplier, an RTC, five 16-bit timers, and digital I/Os.