CC2340R5 Series
SimpleLink™ 32bit Arm® Cortex®-M0+ 2.4GHz wireless MCU with 512kB flash
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
SimpleLink™ 32bit Arm® Cortex®-M0+ 2.4GHz wireless MCU with 512kB flash
| Part | Type | Protocol | Sensitivity | GPIO | Memory Size | RF Family/Standard | Serial Interfaces | Operating Temperature [Min] | Operating Temperature [Max] | Current - Transmitting [Min] | Current - Transmitting [Max] | Modulation | Mounting Type | Current - Receiving [Min] | Current - Receiving [Max] | Supplier Device Package | Voltage - Supply [Max] | Voltage - Supply [Min] | Power - Output | Package / Case | Frequency [Min] | Frequency [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments CC2340R52E0RGER | TxRx + MCU | Bluetooth v5.3, Wireless M-Bus, Zigbee® | -102 dBm | 12 | 12 KB, 36 kB, 512 kb | 802.15.4, Bluetooth | GPIO, I2C, PWM, SPI, UART | -40 °C | 125 °C | 4 mA | 19 mA | DSSS, GFSK, QPSK | Surface Mount | 5.3 mA | 9 mA | 24-VQFN (4x4) | 3.8 V | 1.71 V | 8 dBm | 24-VFQFN Exposed Pad | ||
Texas Instruments CC2340R52N0RKPR | TxRx + MCU | Bluetooth v5.3, Zigbee® | -102 dBm | 26 | 12 KB, 36 kB, 512 kb | 802.15.4, Bluetooth | ADC, GPIO, I2C, JTAG, PWM, SPI, UART | -40 °C | 85 °C | 4 mA | 19 mA | DSSS, GFSK, QPSK | Surface Mount | 5.3 mA | 9 mA | 40-VQFN (5x5) | 3.8 V | 1.71 V | 8 dBm | 40-VFQFN Exposed Pad | 2.36 GHz | 2.5 GHz |
Texas Instruments CC2340R52N0RGER | TxRx + MCU | Bluetooth v5.3, Zigbee® | -102 dBm | 12 | 12 KB, 36 kB, 512 kb | 802.15.4, Bluetooth | ADC, GPIO, I2C, JTAG, PWM, SPI, UART | -40 °C | 85 °C | 4 mA | 19 mA | DSSS, GFSK, QPSK | Surface Mount | 5.3 mA | 9 mA | 24-VQFN (4x4) | 3.8 V | 1.71 V | 8 dBm | 24-VFQFN Exposed Pad | 2.36 GHz | 2.5 GHz |
Key Features
• Wireless microcontrollerOptimized 48MHz Arm Cortex-M0+ processorUp to 512KB of in-system programmable flash12KB of ROM for bootloader and driversUp to 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode2.4GHz RF transceiver compatible with Bluetooth 5.3 Low Energy and IEEE 802.15.4 PHY and MACIntegrated balunSupports over-the-air upgrade (OTA)Serial wire debug (SWD)Low power consumptionMCU consumption:2.6mA active mode, CoreMark53µA/MHz running CoreMark< 710nA standby mode on CC2340R52165nA shutdown mode, wake-up on pinRadio consumption:5.3mA RX5.1mA TX at 0dBm< 11.0mA TX at +8dBmWireless protocol supportBluetooth® 5.3 Low EnergyZigbee®ThreadProprietary systemsHigh-performance radio–102dBm sensitivity for Bluetooth® Low Energy 125kbps–96.5dBm sensitivity for Bluetooth® Low Energy 1Mbps–98dBm sensitivity for IEEE 802.15.4 (2.4GHz)Output power up to +8dBm with temperature compensationRegulatory complianceSuitable for systems targeting compliance with these standards:EN 300 328 (Europe)FCC CFR47 Part 15ARIB STD-T66 (Japan)MCU peripheralsUp to 26 I/O pads2 IO pads SWD, muxed with GPIOs2 IO pads LFXT, muxed with GPIOsUp to 22 DIOs (analog or digital IOs)Up to 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support12-bit ADC, 1.2Msps with external reference, 267ksps with internal reference, up to 12 external ADC inputs1× low power comparator1× UART1× SPI1× I2CReal-time clock (RTC)Integrated temperature and battery monitorWatchdog timerSecurity enablersAES 128-bit cryptographic acceleratorRandom number generator from on-chip analog noiseDevelopment tools and softwareLP-EM-CC2340R5 LaunchPadDevelopment KitSimpleLink™ Low Power F3 software development kitSmartRF™ Studiofor simple radio configurationSysConfigsystem configuration toolOperating rangeOn-chip buck DC/DC converter1.71V to 3.8V single supply voltageTj: –40°C up to +125°CRoHS-compliant package5mm × 5mm RKP QFN404mm × 4mm RGE QFN242.2mm × 2.6mm YBG WCSP (Preview)Wireless microcontrollerOptimized 48MHz Arm Cortex-M0+ processorUp to 512KB of in-system programmable flash12KB of ROM for bootloader and driversUp to 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode2.4GHz RF transceiver compatible with Bluetooth 5.3 Low Energy and IEEE 802.15.4 PHY and MACIntegrated balunSupports over-the-air upgrade (OTA)Serial wire debug (SWD)Low power consumptionMCU consumption:2.6mA active mode, CoreMark53µA/MHz running CoreMark< 710nA standby mode on CC2340R52165nA shutdown mode, wake-up on pinRadio consumption:5.3mA RX5.1mA TX at 0dBm< 11.0mA TX at +8dBmWireless protocol supportBluetooth® 5.3 Low EnergyZigbee®ThreadProprietary systemsHigh-performance radio–102dBm sensitivity for Bluetooth® Low Energy 125kbps–96.5dBm sensitivity for Bluetooth® Low Energy 1Mbps–98dBm sensitivity for IEEE 802.15.4 (2.4GHz)Output power up to +8dBm with temperature compensationRegulatory complianceSuitable for systems targeting compliance with these standards:EN 300 328 (Europe)FCC CFR47 Part 15ARIB STD-T66 (Japan)MCU peripheralsUp to 26 I/O pads2 IO pads SWD, muxed with GPIOs2 IO pads LFXT, muxed with GPIOsUp to 22 DIOs (analog or digital IOs)Up to 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support12-bit ADC, 1.2Msps with external reference, 267ksps with internal reference, up to 12 external ADC inputs1× low power comparator1× UART1× SPI1× I2CReal-time clock (RTC)Integrated temperature and battery monitorWatchdog timerSecurity enablersAES 128-bit cryptographic acceleratorRandom number generator from on-chip analog noiseDevelopment tools and softwareLP-EM-CC2340R5 LaunchPadDevelopment KitSimpleLink™ Low Power F3 software development kitSmartRF™ Studiofor simple radio configurationSysConfigsystem configuration toolOperating rangeOn-chip buck DC/DC converter1.71V to 3.8V single supply voltageTj: –40°C up to +125°CRoHS-compliant package5mm × 5mm RKP QFN404mm × 4mm RGE QFN242.2mm × 2.6mm YBG WCSP (Preview)
Description
AI
The CC2340R SimpleLink™ family of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth® 5.3 Low Energy, Zigbee, Thread, and Proprietary 2.4GHz applications. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, retail EPOS (electronic point of sale), ESL (electronic shelf), and Personal electronics (toys, HID, stylus pens) markets. Highlighted features of this device include:
The CC2340R family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit theSimpleLink™ MCU platform.
The CC2340R SimpleLink™ family of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth® 5.3 Low Energy, Zigbee, Thread, and Proprietary 2.4GHz applications. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, retail EPOS (electronic point of sale), ESL (electronic shelf), and Personal electronics (toys, HID, stylus pens) markets. Highlighted features of this device include:
The CC2340R family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit theSimpleLink™ MCU platform.