65LVDM051 Series

Dual LVDS transmitter & receiver

Catalog(6 parts)

Part	Voltage - Supply▲▼	Voltage - Supply▲▼	Protocol	Data Rate▲▼	Duplex	Operating Temperature▲▼	Operating Temperature▲▼	Mounting Type	Supplier Device Package	Package / Case	Package / Case▲▼	Number of Drivers/Receivers▲▼	Number of Drivers/Receivers▲▼	Type	Package / Case▲▼	Package / Case▲▼	Qualification	Grade
Texas Instruments SN65LVDM051DRG4 2/2 Transceiver Full LVDS 16-SOIC	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	85 °C	Surface Mount	16-SOIC	16-SOIC	0.003911599982529879 m, 3.900000095367432 ul	2 ul	2 ul	Transceiver
Texas Instruments SN65LVDM051DG4 2/2 Transceiver Full LVDS 16-SOIC	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	85 °C	Surface Mount	16-SOIC	16-SOIC	0.003911599982529879 m, 3.900000095367432 ul	2 ul	2 ul	Transceiver
Texas Instruments SN65LVDM051PWR 2/2 Transceiver Full LVDS 16-TSSOP	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	85 °C	Surface Mount	16-TSSOP	16-TSSOP		2 ul	2 ul	Transceiver	0.004394200164824724 m	0.004399999976158142 m
Texas Instruments SN65LVDM051PWRG4 2/2 Transceiver Full LVDS 16-TSSOP	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	85 °C	Surface Mount	16-TSSOP	16-TSSOP		2 ul	2 ul	Transceiver	0.004394200164824724 m	0.004399999976158142 m
Texas Instruments SN65LVDM051QDQ1 2/2 Transceiver Full LVDS 16-SOIC	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	125 °C	Surface Mount	16-SOIC	16-SOIC	0.003911599982529879 m, 3.900000095367432 ul	2 ul	2 ul	Transceiver			AEC-Q100	Automotive
Texas Instruments SN65LVDM051DR 2/2 Transceiver Full LVDS 16-SOIC	3.5999999046325684 V	3 V	LVDS	524288000 bit/s	Full	-40 °C	85 °C	Surface Mount	16-SOIC	16-SOIC	0.003911599982529879 m, 3.900000095367432 ul	2 ul	2 ul	Transceiver

Key Features

• Low-Voltage Differential 50-Line Drivers and ReceiversTypical Full-Duplex Signaling Rates of 100 MbpsBus-Terminal ESD Exceeds 12 kVOperates From a Single 3.3-V SupplyLow-Voltage Differential Signaling With TypicalOutput Voltages of 340 mV With a 50-LoadValid Output With as Little as 50-mV InputVoltage DifferencePropagation Delay TimesDriver: 1.7 ns TypicalReceiver: 3.7 ns TypicalPower Dissipation at 200 MHzDriver: 50 mW TypicalReceiver: 60 mW TypicalLVTTL Input Levels Are 5-V TolerantDriver Is High Impedance When Disabled or With VCC< 1.5 VReceiver Has Open-Circuit FailsafeLow-Voltage Differential 50-Line Drivers and ReceiversTypical Full-Duplex Signaling Rates of 100 MbpsBus-Terminal ESD Exceeds 12 kVOperates From a Single 3.3-V SupplyLow-Voltage Differential Signaling With TypicalOutput Voltages of 340 mV With a 50-LoadValid Output With as Little as 50-mV InputVoltage DifferencePropagation Delay TimesDriver: 1.7 ns TypicalReceiver: 3.7 ns TypicalPower Dissipation at 200 MHzDriver: 50 mW TypicalReceiver: 60 mW TypicalLVTTL Input Levels Are 5-V TolerantDriver Is High Impedance When Disabled or With VCC< 1.5 VReceiver Has Open-Circuit Failsafe

Description

The SN65LVDM179, SN65LVDM180, SN65LVDM050, and SN65LVDM051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve high signaling rates. These circuits are similar to TIA/EIA-644 standard compliant devices (SN65LVDS) counterparts, except that the output current of the drivers is doubled. This modification provides a minimum differential output voltage magnitude of 247 mV across a 50-load simulating two transmission lines in parallel. This allows having data buses with more than one driver or with two line termination resistors. The receivers detect a voltage difference of 50 mV with up to 1 V of ground potential difference between a transmitter and receiver. The intended application of these devices and signaling techniques is point-to-point half duplex, baseband data transmission over a controlled impedance media of approximately 100characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application-specific characteristics. The SN65LVDM179, SN65LVDM180, SN65LVDM050, and SN65LVDM051 are characterized for operation from –40°C to 85°C. The SN65LVDM179, SN65LVDM180, SN65LVDM050, and SN65LVDM051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve high signaling rates. These circuits are similar to TIA/EIA-644 standard compliant devices (SN65LVDS) counterparts, except that the output current of the drivers is doubled. This modification provides a minimum differential output voltage magnitude of 247 mV across a 50-load simulating two transmission lines in parallel. This allows having data buses with more than one driver or with two line termination resistors. The receivers detect a voltage difference of 50 mV with up to 1 V of ground potential difference between a transmitter and receiver. The intended application of these devices and signaling techniques is point-to-point half duplex, baseband data transmission over a controlled impedance media of approximately 100characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application-specific characteristics. The SN65LVDM179, SN65LVDM180, SN65LVDM050, and SN65LVDM051 are characterized for operation from –40°C to 85°C.