74CBTLV3857 Series

3.3-V, 1:1 (SPST), 10-channel FET bus switch with internal pulldown resistors

Catalog

3.3-V, 1:1 (SPST), 10-channel FET bus switch with internal pulldown resistors

Part	Independent Circuits	Package Width	Package Name	Package Length	Operating Temperature (Min)	Operating Temperature (Max)	Type	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Mounting Type	Circuit	Voltage Supply Source
Texas Instruments SN74CBTLV3857PWR	1	4.4 mm	24-TSSOP	0.173 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DWG4	1	7.5 mm	24-SOIC	0.295 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DWE4	1	7.5 mm	24-SOIC	0.295 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DBQR	1	3.9 mm	24-SSOP	0.154 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments 74CBTLV3857DBQRG4	1	3.9 mm	24-SSOP	0.154 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments 74CBTLV3857DBQRE4	1	3.9 mm	24-SSOP	0.154 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DW	1	7.5 mm	24-SOIC	0.295 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DWR	1	7.5 mm	24-SOIC	0.295 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply
Texas Instruments SN74CBTLV3857DGVR	1	4.4 mm	24-TFSOP 24-TVSOP	0.173 in	-40 °C	85 °C	Bus Switch	3.6 V	3 V	Surface Mount	10 x 1:1	Single Supply

Catalog

3.3-V, 1:1 (SPST), 10-channel FET bus switch with internal pulldown resistors

Description

This 10-bit FET bus switch is designed for 3-V to 3.6-V VCCoperation and SSTL_2 output-enable (OE\) input levels. When OE\ is low, the 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. There are 10-kpulldown resistors to ground on the B port. The FET switch on-state resistance is designed to replace the series terminating resistor in the SSTL_2 data path. This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. This 10-bit FET bus switch is designed for 3-V to 3.6-V VCCoperation and SSTL_2 output-enable (OE\) input levels. When OE\ is low, the 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. There are 10-kpulldown resistors to ground on the B port. The FET switch on-state resistance is designed to replace the series terminating resistor in the SSTL_2 data path. This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.