TMP400 Series
Remote and Local Temperature Sensor with N-Factor and Series-R Correction in QSSOP-16
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Sensing Temperature - Local▲▼ | Sensing Temperature - Local▲▼ | Accuracy - Highest (Lowest)▲▼ | Accuracy - Highest (Lowest)▲▼ | Supplier Device Package | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Output Type | Resolution▲▼ | Sensing Temperature - Remote▲▼ | Sensing Temperature - Remote▲▼ | Features | Test Condition▲▼ | Test Condition▲▼ | Test Condition▲▼ | Test Condition▲▼ | Package / Case | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
125 °C | -40 °C | 1 °C, 2.5 °C | -2.5 °C, -1 °C | 16-QSOP | 127 °C | -55 °C | 2.700000047683716 V | 5.5 V | SMBus | 11 b | -40 °C | 125 °C | One-Shot, Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode, Standby Mode | 85 °C | 15 °C | -40 °C | 125 °C | 16-SSOP (0.154", 3.90mm Width) | Surface Mount |
Key Features
• ±1°C REMOTE DIODE SENSOR±1°C LOCAL TEMPERATURE SENSORPROGRAMMABLE NON-IDEALITY FACTORPROGRAMMABLE SERIES RESISTANCE CANCELLATIONALERT FUNCTIONPROGRAMMABLE RESOLUTION: 9 to 12 BitsPROGRAMMABLE THRESHOLD LIMITSTWO-WIRE/SMBus™ SERIAL INTERFACEMINIMUM AND MAXIMUM TEMPERATURE MONITORSMULTIPLE INTERFACE ADDRESSESALERTPIN CONFIGURATIONDIODE FAULT DETECTIONAPPLICATIONSLCD/DLP®/LCOS PROJECTORSSERVERSINDUSTRIAL CONTROLLERSCENTRAL OFFICE TELECOM EQUIPMENTDESKTOP AND NOTEBOOK COMPUTERSSTORAGE AREA NETWORKS (SAN)INDUSTRIAL AND MEDICAL EQUIPMENTPROCESSOR/FPGA TEMPERATURE MONITORINGDLP is a registered trademark of Texas Instruments.SMBus is a trademark of Intel Corp.All other trademarks are the property of their respective owners.±1°C REMOTE DIODE SENSOR±1°C LOCAL TEMPERATURE SENSORPROGRAMMABLE NON-IDEALITY FACTORPROGRAMMABLE SERIES RESISTANCE CANCELLATIONALERT FUNCTIONPROGRAMMABLE RESOLUTION: 9 to 12 BitsPROGRAMMABLE THRESHOLD LIMITSTWO-WIRE/SMBus™ SERIAL INTERFACEMINIMUM AND MAXIMUM TEMPERATURE MONITORSMULTIPLE INTERFACE ADDRESSESALERTPIN CONFIGURATIONDIODE FAULT DETECTIONAPPLICATIONSLCD/DLP®/LCOS PROJECTORSSERVERSINDUSTRIAL CONTROLLERSCENTRAL OFFICE TELECOM EQUIPMENTDESKTOP AND NOTEBOOK COMPUTERSSTORAGE AREA NETWORKS (SAN)INDUSTRIAL AND MEDICAL EQUIPMENTPROCESSOR/FPGA TEMPERATURE MONITORINGDLP is a registered trademark of Texas Instruments.SMBus is a trademark of Intel Corp.All other trademarks are the property of their respective owners.
Description
AI
The TMP400 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The Two-Wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
The TMP400 is customizable with programmable: series resistance cancellation, non-ideality factor, resolution, and threshold limits. Other features are: minimum and maximum temperature monitors, wide remote temperature measurement range (up to +127.9375°C), diode fault detection, and temperature alert function.
The TMP400 is available in a QSSOP-16 package.
The TMP400 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The Two-Wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
The TMP400 is customizable with programmable: series resistance cancellation, non-ideality factor, resolution, and threshold limits. Other features are: minimum and maximum temperature monitors, wide remote temperature measurement range (up to +127.9375°C), diode fault detection, and temperature alert function.
The TMP400 is available in a QSSOP-16 package.