Zenode.ai Logo

Catalog

Key Features

* ARM Cortex-M4F CPU running at up to 120 MHz
* Floating Point Unit (FPU)
* Embedded Trace Module (ETM) with instruction trace stream
* Core Sight Embedded Trace Buffer (ETB)
* Error Correction Code (ECC)
* Dual bank with Read-While-Write (RWW) support
* EEPROM hardware emulation
* Error Correction Code (ECC) RAM option
* Up to 4 KB of Tightly Coupled Memory (TCM)
* Up to 8 KB additional SRAM with backup retention capability
* Power-on Reset (POR) and Brown-out detection (BOD)
* Internal and external clock options
* External Interrupt Controller (EIC)
* Two-pin Serial Wire Debug (SWD) programming, test, and debugging interface
* Five Low Power Modes (Idle, Standby, Hibernate, Backup, and Off )
* Sleep Walking peripherals.
* Battery backup support
* Embedded Buck/LDO regulator supporting on-the-fly selection.
* 65µA/MHz active power consumption.
* Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)
* True Random Number Generator (TRNG)
* RSA, DSA
* Elliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)
* Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA
* 32-channel Direct Memory Access Controller (DMAC)
* Compatibility with SD and SDHC Memory Card Specification Version 3.01
* Compatibility with SDIO Specification Version 3.0
* Compliant with JDEC specification, MMC memory cards V4.51
* eXecute-In-Place (XIP) support
* Up to 75 MHz SDR operation and DDR support
* Embedded host and device function
* 10/100 Mbps in MII and RMII with dedicated DMA
* IEEE 1588 Precision Time Protocol (PTP) , Time Stamping Unit (TSU) support
* IEEE802.3AZ/AF/PoE energy efficiency support
* Support for 802.1AS and 1588 precision clock synchronization protocol
* Wake on LAN support
* supporting CAN2.0 A/B and CAN-FD 1.0
* USART with full-duplex and single-wire half-duplex configuration
* ISO7816
* I2C up to 3.4MHz
* SPI
* LIN master/slave
* RS485
* SPI inter-byte space
* One two-channel Inter-IC Sound Interface (I2S)
* Up to 14-bit parallel capture mode
* Up to 256 channel capacitive touch and proximity sensing
* 32-channel Event System
* 16-bit ,32-bit or 8-bit TC with two compare/capture channels
* Two 24-bit Timer/Counters for Control (TCC), with extended functions:
* Up to 5 wake-up pins with tamper detection and de-bouncing filter
* Watchdog Timer (WDT) with Window mode
* CRC-32 generator
* Position Decoder (PDEC)
* Frequency meter (FREQM)
* One Configurable Custom Logic (CCL)
* Differential and single-ended input
* Automatic offset and gain error compensation
* Oversampling and decimation in hardware to support 13-, 14-, 15-, or 16-bit resolution
* Dual 12-bit, 1 MSPS Output Digital-to-Analog Converter (DAC)
* Two Analog Comparators (AC) with Window Compare function
* One temperature sensor
* 81  programmable I/O pins
* 1.71V – 3.6V
* 100-pin TQFP

Description

AI
**The SAM E54 high performance micro-controller series features a 32-bit ARM® Cortex®-M4 processor with Floating Point Unit (FPU), running up to 120 MHz ,up to 1 MB Dual Panel Flash with ECC, and up to 256 KB of SRAM with ECC .It also adds a 10/100 Ethernet MAC and 2 CAN-FD ports targeted for industrial automation ,automotive applications and general purpose applications requiring Wired connectivity.** **Series offers excellent features with class leading power performance and integrated hardware security.** **Key features** · **Quad Serial Peripheral Interface(QSPI) with Execute in Place (XIP) Support.** · **Up to 2 Secure Digital Host Controller (SDHC)** **· 10/100 Ethernet MAC with IEEE 1588 support.** · **Up to 2 CAN-FD Interface.** · **Inter-IC Sound(I2S)Controller for Audio** · **Peripheral Touch Controller (PTC) supporting up to 256 channels of capacitive touch .** · **Full speed USB with embedded Host/device.** · **Supports 5 Low power modes with class leading 65µA/MHz Active Power Performance.** · **Integrated security including Asymmetric and Symmetric Crypto hardware acceleration** · **Serial communication (SERCOM) ports configurable as UART/USART, ISO 7816, SPI or I****2****C** Supported by MPLAB X IDE and [MPLAB Harmony](https://www.microchip.com/en-us/tools-resources/configure/mplab-harmony). **Functional Safety** This device supports the **ISO 26262 (ASIL B)** functional safety standard. · The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the [32-bit Microcontrollers Functional Safety](https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors/32-bit-mcus/32-bit-functional-safety) web page. · Learn more about [32-bit MCUs with Functional Safety](https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors/32-bit-mcus/32-bit-functional-safety) capabilities including device hardware and certified software libraries.