TLK110 Series
Industrial 10/100 Ethernet PHY
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Industrial 10/100 Ethernet PHY
| Part | Duplex | Operating Temperature [Min] | Operating Temperature [Max] | Type | Package / Case | Protocol | Voltage - Supply [Max] | Voltage - Supply [Min] | Supplier Device Package | Mounting Type | Supplied Contents | Function | Utilized IC / Part | Secondary Attributes | Embedded |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLK110PT | Full | -40 °C | 85 °C | Transceiver | 48-LQFP | MII, RMII | 3.6 V | 3 V | 48-LQFP (7x7) | Surface Mount | |||||
Texas Instruments TLK110PTR | Full | -40 °C | 85 °C | Transceiver | 48-LQFP | MII, RMII | 3.6 V | 3 V | 48-LQFP (7x7) | Surface Mount | |||||
Texas Instruments TLK110CUSEVM | Interface | Board(s) | Ethernet PHY | TLK110 | On-Board LEDs |
Key Features
• Low Power Consumption:Single Supply: <205mW PHY, 275mW withCenter Tap (Typical)Dual Supplies: <126mW PHY, 200mW withCenter Tap (Typical)Programmable Power Back Off to reduce PHY power upto 20% in systems with shorter cablesLow deterministic latency supports IEEE1588implementationCable DiagnosticsProgrammable Fast Link Down Modes,<10µs reaction timeVariable I/O voltage range: 1.8V to 3.3V3.3V MAC InterfaceFixed TX Clock to XI, with programmablephase shiftAuto-MDIX for 10/100MbsEnergy Detection Mode25 MHz Clock OutMII and RMII CapabilitiesSerial Management InterfaceIEEE 802.3u MIIIEEE 802.3u Auto-Negotiation and ParallelDetectionError-Free 100Base-T Operation up to150 Meters Under Typical ConditionsError-Free 10Base-T Operation up to300 Meters Under Typical ConditionsIEEE 802.3u ENDEC, 10Base-T Transceivers and FiltersIEEE 802.3u PCS, 100Base-TX TransceiversIEEE 1149.1 JTAGIntegrated ANSI X3.263 Compliant TP-PMD PhysicalSublayer with Adaptive Equalization and BaselineWander CompensationProgrammable LED Support Link, 10/100Mbs Mode,Activity, and Collision Detect10/100Mbs Packet BIST (Built in Self Test)HBM ESD protection on RD± and TD± of 16kV48-pin LQFP Package (7mm) × (7mm)Low Power Consumption:Single Supply: <205mW PHY, 275mW withCenter Tap (Typical)Dual Supplies: <126mW PHY, 200mW withCenter Tap (Typical)Programmable Power Back Off to reduce PHY power upto 20% in systems with shorter cablesLow deterministic latency supports IEEE1588implementationCable DiagnosticsProgrammable Fast Link Down Modes,<10µs reaction timeVariable I/O voltage range: 1.8V to 3.3V3.3V MAC InterfaceFixed TX Clock to XI, with programmablephase shiftAuto-MDIX for 10/100MbsEnergy Detection Mode25 MHz Clock OutMII and RMII CapabilitiesSerial Management InterfaceIEEE 802.3u MIIIEEE 802.3u Auto-Negotiation and ParallelDetectionError-Free 100Base-T Operation up to150 Meters Under Typical ConditionsError-Free 10Base-T Operation up to300 Meters Under Typical ConditionsIEEE 802.3u ENDEC, 10Base-T Transceivers and FiltersIEEE 802.3u PCS, 100Base-TX TransceiversIEEE 1149.1 JTAGIntegrated ANSI X3.263 Compliant TP-PMD PhysicalSublayer with Adaptive Equalization and BaselineWander CompensationProgrammable LED Support Link, 10/100Mbs Mode,Activity, and Collision Detect10/100Mbs Packet BIST (Built in Self Test)HBM ESD protection on RD± and TD± of 16kV48-pin LQFP Package (7mm) × (7mm)
Description
AI
The TLK110 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The TLK110 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK110 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK110 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK110 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK110. For more detail, see application note SLLA328.
The TLK110 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The TLK110 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK110 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK110 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK110 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK110. For more detail, see application note SLLA328.