STEVAL-IDB005V1D Series
2 kW two-channel interleaved PFC reference design based on the STNRGPF12 digital controller with digital inrush current control
Manufacturer: STMicroelectronics
Catalog
2 kW two-channel interleaved PFC reference design based on the STNRGPF12 digital controller with digital inrush current control
...
| Part | Outputs and Type | Outputs and Type | Regulator Topology | Utilized IC / Part | Main Purpose | Current - Output | Voltage - Input [Min] | Voltage - Input [Max] | Frequency - Switching | Board Type | Voltage - Output | Supplied Contents | Contents | Power - Output | Channels per IC | Amplifier Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Output Type | Max Output Power x Channels @ Load | Frequency | Type | For Use With/Related Products | Embedded | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | Non-Isolated | 1 | Buck | ST1S12 | DC/DC Step Down | 700 mA | 2.5 V | 5.5 V | 1.7 MHz | Fully Populated | 1.2 V | Board(s) | |||||||||||||
STMicroelectronics | 1 Isolated Output | Flyback | VIPer06 | AC/DC Primary Side | 600 mA | 85 VAC | 265 VAC | 115 kHz | 5 V | Board(s) | 3 W | ||||||||||||||
STMicroelectronics | 8-DFN-EP Package | Bare (Unpopulated) | Board(s) | 2 - Dual | General Purpose | ||||||||||||||||||||
STMicroelectronics | TS4621E | Fully Populated | Board(s) | Class G | 2.3 V | 4.8 V | Headphones 2-Channel (Stereo) | ||||||||||||||||||
STMicroelectronics | TDA7491HV | Fully Populated | Board(s) | 5 V | 18 V | 2-Channel (Stereo) | 2 8 Ohm 20 W | ||||||||||||||||||
STMicroelectronics | Non-Isolated | 1 | Boost | LNBH25LS | LNB Special Purpose DC/DC | 8 V | 16 V | Fully Populated | Board(s) | ||||||||||||||||
STMicroelectronics | Board(s) | 315 MHz | Transceiver | SPIRIT1 | |||||||||||||||||||||
STMicroelectronics | Isolated | 1 | Flyback | VIPer25 | AC/DC Primary Side | 840 mA | 90 VAC | 265 VAC | Fully Populated | 12 V | Board(s) | 10 W | |||||||||||||
STMicroelectronics | Board(s) | 2.4 GHz | Bluetooth® 5.x (BLE) Transceiver | BlueNRG-2 | |||||||||||||||||||||
STMicroelectronics | TN5015H-6G | Board(s) | Overcurrent |
Key Features
• STEVAL-BCN002V1 sensor board:
- BlueNRG-2: Bluetooth Low Energy single-mode system-on-chip
- BALF-NRG-02D3: ultra-miniature balun and harmonic filter
- LSM6DSO: iNEMO 6DoF inertial module, ultra-low power and high accuracy
- LIS2MDL: magnetic sensor, digital output, 50 gauss magnetic field dynamic range, ultra-low power, high performance, 3-axis magnetometer
- VL53L1X: long range Time-of-Flight sensor based on ST FlightSense technology
- MP34DT05TR-A: MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
- LPS22HH: ultra-compact piezo-resistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold dust resistant, holed LGA package (HLGA)
- HTS221: capacitive digital sensor for relative humidity and temperature
- CR2032 battery powered (not included)
• STEVAL-BCN002V1D programming board:
- program and debug firmware running on sensor board
- supply power to the sensor board
• Target Applications:
- Internet of Things, Smart Building, Home and City
- Tracking System, Supply Chain/ Cold-Chain Management
- Smart Agriculture (soil control, animal activity tracking, etc.)
Description
AI
The STEVAL-BFA001V1B is an industrial reference design kit designed for condition monitoring (CM) and predictive maintenance (PdM).
The hardware development kit consists of an industrial sensor board (STEVAL-IDP005V1), an adapter for the ST-LINK/V2-1 programming and debugging tool (STEVAL-UKI001V1), a 0.050" 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable.
The firmware package includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the 3D digital accelerometer with 3 kHz flat bandwidth. The package includes drivers for pressure, relative humidity and temperature sensor monitoring. Audio algorithms for acoustic emission (AE) are also part of the package.
The firmware runs on the high performance STM32F469AI, ARM®Cortex®-M4, 32-bit microcontroller and the sensor data analysis results are sent via wired connectivity based on IO-Link device transceiver (IO-Link stack protocol not included).
The STEVAL-BFA001V1B reference design is suitable for monitoring motors, pumps and fans, and can accelerate the development of predictive maintenance solutions.
The package also allows connection with the STEVAL-IDP004V1 IO-Link master capable, multi-port evaluation board; a PC GUI included in the package displays the algorithms output and sensor data. The data can also be displayed on a PC using a common terminal emulator by simply connecting the STEVAL-IDP005V1 to a PC through the STEVAL-UKI001V1 adapter and ST-LINK/V2-1 included on any STM32 Nucleo-64 development board.
The package includes an industrial M12 cable for power or connection with a master port. The connection is managed using a standard multipolar cable with one wire used for IO-Link data, one for the L+ line (positive supply voltage pole) and one for the L- line (negative supply voltage pole).
The layout is designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications.
The STEVAL-IDP005V1 is specifically designed with dimensions (50mm x 9mm x 9mm) that reflect real industrial applications and needs.
The firmware is freely available on STSW-BFA001V1.