UCC21551 Series
4A/6A 5kVRMS dual-channel isolated gate driver with EN and DT pins for IGBT and SiC
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Primary Attributes | Embedded▲▼ | Contents | Type | Function | Supplied Contents | Utilized IC / Part |
|---|---|---|---|---|---|---|---|
2-Channel (Dual) | Board(s) | Power Management | Gate Driver | Board(s) | UCC21551 |
Key Features
• Universal: dual low-side, dual high-side or half-bridge driverJunction temperature range –40 to +150°CUp to 4A peak source and 6A peak sink outputCommon-mode transient immunity (CMTI) greater than 125V/nsUp to 25V VDD output drive supply5V,8V, 12V and 17V VDD UVLO optionsSwitching parameters:33ns typical propagation delay5ns maximum pulse-width distortion10µs maximum VDD power-up delayUVLO protection for all power suppliesFast enable for power sequencingUniversal: dual low-side, dual high-side or half-bridge driverJunction temperature range –40 to +150°CUp to 4A peak source and 6A peak sink outputCommon-mode transient immunity (CMTI) greater than 125V/nsUp to 25V VDD output drive supply5V,8V, 12V and 17V VDD UVLO optionsSwitching parameters:33ns typical propagation delay5ns maximum pulse-width distortion10µs maximum VDD power-up delayUVLO protection for all power suppliesFast enable for power sequencing
Description
AI
The UCC21551x is an isolated dual channel gate driver family with programmable dead time and wide temperature range. It is designed with 4A peak-source and 6A peak-sink current to drive power MOSFET, SiC, and IGBT transistors.
The UCC21551x can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver. The input side is isolated from the two output drivers by a 5kVRMS isolation barrier, with a minimum of 125V/ns common-mode transient immunity (CMTI).
Protection features include: resistor programmable dead time, disable feature to shut down both outputs simultaneously, and integrated de-glitch filter that rejects input transients shorter than 5ns. All supplies have UVLO protection.
With all these advanced features, the UCC21551x device enables high efficiency, high power density, and robustness in a wide variety of power applications.
The UCC21551x is an isolated dual channel gate driver family with programmable dead time and wide temperature range. It is designed with 4A peak-source and 6A peak-sink current to drive power MOSFET, SiC, and IGBT transistors.
The UCC21551x can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver. The input side is isolated from the two output drivers by a 5kVRMS isolation barrier, with a minimum of 125V/ns common-mode transient immunity (CMTI).
Protection features include: resistor programmable dead time, disable feature to shut down both outputs simultaneously, and integrated de-glitch filter that rejects input transients shorter than 5ns. All supplies have UVLO protection.
With all these advanced features, the UCC21551x device enables high efficiency, high power density, and robustness in a wide variety of power applications.