MSP430F2132 Series
16 MHz MCU with 8KB Flash, 512B SRAM, 10-bit ADC, comparator, I2C/SPI/UART
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
16 MHz MCU with 8KB Flash, 512B SRAM, 10-bit ADC, comparator, I2C/SPI/UART
| Part | Core Processor | Package / Case | Package / Case | Package / Case | Speed | Number of I/O | Mounting Type | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Supplier Device Package | Program Memory Type | Data Converters [custom] | Data Converters [custom] | Oscillator Type | Program Memory Size | Operating Temperature [Max] | Operating Temperature [Min] | Core Size | RAM Size [custom] | RAM Size [custom] | Connectivity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430F2132IPWR | MSP430 CPU16 | 28-TSSOP | 4.4 mm | 0.173 in | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 28-TSSOP | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Texas Instruments MSP430F2132TRTVR | MSP430 CPU16 | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-WQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 105 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | |||
Texas Instruments MSP430F2132TPW | MSP430 CPU16 | 28-TSSOP | 4.4 mm | 0.173 in | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 28-TSSOP | FLASH | 8 | 10 b | Internal | 8 KB | 105 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Texas Instruments MSP430F2132IPW | MSP430 CPU16 | 28-TSSOP | 4.4 mm | 0.173 in | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 28-TSSOP | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Texas Instruments MSP430F2132IRHBR | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||
Texas Instruments MSP430F2132TRHBR | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 105 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||
Texas Instruments MSP430F2132IRTVR | MSP430 CPU16 | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-WQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | |||
Texas Instruments MSP430F2132QRHBREP | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 125 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||
Texas Instruments MSP430F2132QRHBTEP | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 25 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 125 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||
Texas Instruments MSP430F2132TRHBT | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 105 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||
Texas Instruments MSP430F2132TPWR | MSP430 CPU16 | 28-TSSOP | 4.4 mm | 0.173 in | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 28-TSSOP | FLASH | 8 | 10 b | Internal | 8 KB | 105 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Texas Instruments MSP430F2132IRTVT | MSP430 CPU16 | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-WQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | |||
Texas Instruments MSP430F2132CY | MSP430 CPU16 | Die | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | Diesale | FLASH | 8 | 10 b | Internal | 8 KB | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART | ||||
Texas Instruments MSP430F2132IRHBT | MSP430 CPU16 | 32-VFQFN Exposed Pad | 16 MHz | 24 | Surface Mount | 3.6 V | 1.8 V | 32-VQFN (5x5) | FLASH | 8 | 10 b | Internal | 8 KB | 85 °C | -40 °C | 16-Bit | 8 | 512 | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
Key Features
• Low Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 250 µA at 1 MHz, 2.2 VStandby Mode: 0.7 µAOff Mode (RAM Retention): 0.1 µAUltra-Fast Wake-Up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%Internal Very-Low-Power Low-Frequency Oscillator32-kHz CrystalHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceExternal Resistor16-Bit Timer0_A3 With Three Capture/Compare Registers16-Bit Timer1_A2 With Two Capture/Compare RegistersOn-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion10-Bit 200-ksps A/D Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer ControllerUniversal Serial Communication InterfaceEnhanced UART Supporting Auto-Baudrate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2C™Brownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseBootstrap LoaderOn-Chip Emulation ModuleFamily Members Include:MSP430F2132: 8KB + 256B Flash Memory, 512B RAMMSP430F2122: 4KB + 256B Flash Memory, 512B RAMMSP430F2112: 2KB + 256B Flash Memory, 256B RAMAvailable in 28-Pin TSSOP (PW) and 32-Pin QFN (RHB or RTV) PackagesFor Complete Module Descriptions, See the MSP430x2xx Family User's Guide, Literature Number SLAU144Low Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 250 µA at 1 MHz, 2.2 VStandby Mode: 0.7 µAOff Mode (RAM Retention): 0.1 µAUltra-Fast Wake-Up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%Internal Very-Low-Power Low-Frequency Oscillator32-kHz CrystalHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceExternal Resistor16-Bit Timer0_A3 With Three Capture/Compare Registers16-Bit Timer1_A2 With Two Capture/Compare RegistersOn-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion10-Bit 200-ksps A/D Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer ControllerUniversal Serial Communication InterfaceEnhanced UART Supporting Auto-Baudrate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2C™Brownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseBootstrap LoaderOn-Chip Emulation ModuleFamily Members Include:MSP430F2132: 8KB + 256B Flash Memory, 512B RAMMSP430F2122: 4KB + 256B Flash Memory, 512B RAMMSP430F2112: 2KB + 256B Flash Memory, 256B RAMAvailable in 28-Pin TSSOP (PW) and 32-Pin QFN (RHB or RTV) PackagesFor Complete Module Descriptions, See the MSP430x2xx Family User's Guide, Literature Number SLAU144
Description
AI
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F21x2 series is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface, and up to 24 I/O pins.
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F21x2 series is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface, and up to 24 I/O pins.