TPS92692 Series
high-accuracy LED controller with spread spectrum frequency modulation and internal PWM Generator
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Mounting Type | Dimming | Operating Temperature▲▼ | Operating Temperature▲▼ | Type | Topology | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Frequency▲▼ | Frequency▲▼ | Applications | Number of Outputs▲▼ | Voltage - Supply (Min)▲▼ | Supplier Device Package | Voltage - Supply (Max)▲▼ | Internal Switch(s)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS92692PWPTLED Driver IC 1 Output DC DC Controller Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 20-HTSSOP | Surface Mount | Analog, PWM | -40 °C | 125 °C | DC DC Controller | Step-Down (Buck), Step-Up (Boost) | 0.004394200164824724 m | 20-PowerTSSOP | 0.004399999976158142 m | 800000 Hz | 80000 Hz | Lighting, Signage | 1 ul | 4.5 V | 20-HTSSOP | 65 V |
Key Features
• Wide Input Voltage: 4.5 V to 65 VBetter than ± 4% LED Current Accuracy over –40°C to 150°C Junction Temperature RangeSpread Spectrum Frequency Modulation for Improved EMIComprehensive Fault Protection Circuitry with Current Monitor output and Open Drain Fault Flag IndicatorInternal Analog Voltage to PWM Duty Cycle Generator for stand-alone Dimming OperationCompatible with Direct PWM Input with over 1000:1 Dimming RangeAnalog LED Current Adjust Input (IADJ) with over 15:1 Contrast RatioIntegrated P-Channel Driver to enable Series FET Dimming and LED ProtectionTPS92692-Q1: Automotive Q100 Grade 1 QualifiedWide Input Voltage: 4.5 V to 65 VBetter than ± 4% LED Current Accuracy over –40°C to 150°C Junction Temperature RangeSpread Spectrum Frequency Modulation for Improved EMIComprehensive Fault Protection Circuitry with Current Monitor output and Open Drain Fault Flag IndicatorInternal Analog Voltage to PWM Duty Cycle Generator for stand-alone Dimming OperationCompatible with Direct PWM Input with over 1000:1 Dimming RangeAnalog LED Current Adjust Input (IADJ) with over 15:1 Contrast RatioIntegrated P-Channel Driver to enable Series FET Dimming and LED ProtectionTPS92692-Q1: Automotive Q100 Grade 1 Qualified
Description
AI
The TPS92692 and TPS92692-Q1 are high accuracy peak current mode based controllers designed to support step-up/down LED driver topologies. The device incorporates a rail-to-rail current amplifier to measure LED current and spread spectrum frequency modulation technique for improved EMI performance.
This high performance LED controller can independently modulate LED current using either analog or PWM dimming techniques. Linear analog dimming response with over 15:1 range is obtained by varying the voltage across the high impedance analog adjust (IADJ) input. PWM dimming of LED current is achieved by directly modulating the DIM/PWM input pin with the desired duty cycle or by enabling the internal PWM generator circuit. The PWM generator translates the DC voltage at DIM/PWM pin to corresponding duty cycle by comparing it to the internal triangle wave generator. The optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET.
The TPS92692 and TPS92692-Q1 devices support continuous LED status check through the current monitor (IMON) output. The devices also include an open drain fault indicator output to indicate LED overcurrent, output overvoltage and output undervoltage conditions.
The TPS92692 and TPS92692-Q1 are high accuracy peak current mode based controllers designed to support step-up/down LED driver topologies. The device incorporates a rail-to-rail current amplifier to measure LED current and spread spectrum frequency modulation technique for improved EMI performance.
This high performance LED controller can independently modulate LED current using either analog or PWM dimming techniques. Linear analog dimming response with over 15:1 range is obtained by varying the voltage across the high impedance analog adjust (IADJ) input. PWM dimming of LED current is achieved by directly modulating the DIM/PWM input pin with the desired duty cycle or by enabling the internal PWM generator circuit. The PWM generator translates the DC voltage at DIM/PWM pin to corresponding duty cycle by comparing it to the internal triangle wave generator. The optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET.
The TPS92692 and TPS92692-Q1 devices support continuous LED status check through the current monitor (IMON) output. The devices also include an open drain fault indicator output to indicate LED overcurrent, output overvoltage and output undervoltage conditions.