TPA3118 Series
30-W stereo, 60-W mono, 4.5- to 26-V supply, analog input Class-D audio amplifier
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
30-W stereo, 60-W mono, 4.5- to 26-V supply, analog input Class-D audio amplifier
| Part | Package / Case | Package / Case | Supplier Device Package | Output Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Max Output Power x Channels @ Load | Max Output Power x Channels @ Load [custom] | Type | Features | Operating Temperature [Max] | Operating Temperature [Min] | Mounting Type | Grade | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPA3118D2DAPR | 32-PowerTSSOP | 0.24 in, 6.1 mm | 32-HTSSOP | 2-Channel (Stereo) | 26 V | 4.5 V | 30 W | 2 | Class D | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown | 85 °C | -40 °C | Surface Mount | ||
Texas Instruments TPA3118D2DAP | 32-PowerTSSOP | 0.24 in, 6.1 mm | 32-HTSSOP | 2-Channel (Stereo) | 26 V | 4.5 V | 30 W | 2 | Class D | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown | 85 °C | -40 °C | Surface Mount | ||
Texas Instruments TPA3118D2QDAPRQ1 | 32-PowerTSSOP | 0.24 in, 6.1 mm | 32-HTSSOP | 2-Channel (Stereo) | 26 V | 4.5 V | 30 W | 2 | Class D | Short-Circuit and Thermal Protection | 125 °C | -40 °C | Surface Mount | Automotive | AEC-Q100 |
Key Features
• Supports Multiple Output Configurations2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)Wide Voltage Range: 4.5 V to 26 VEfficient Class-D Operation>90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink SizeAdvanced Modulation SchemesMultiple Switching FrequenciesAM AvoidanceMaster and Slave SynchronizationUp to 1.2-MHz Switching FrequencyFeedback Power-Stage Architecture With High PSRR Reduces PSU RequirementsProgrammable Power LimitDifferential and Single-Ended InputsStereo and Mono Mode With Single-Filter Mono ConfigurationSingle Power Supply Reduces Component CountIntegrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error ReportingThermally Enhanced PackagesDAD (32-Pin HTSSOP Pad Up)DAP (32-Pin HTSSOP Pad Down)–40°C to 85°C Ambient Temperature RangeSupports Multiple Output Configurations2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)Wide Voltage Range: 4.5 V to 26 VEfficient Class-D Operation>90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink SizeAdvanced Modulation SchemesMultiple Switching FrequenciesAM AvoidanceMaster and Slave SynchronizationUp to 1.2-MHz Switching FrequencyFeedback Power-Stage Architecture With High PSRR Reduces PSU RequirementsProgrammable Power LimitDifferential and Single-Ended InputsStereo and Mono Mode With Single-Filter Mono ConfigurationSingle Power Supply Reduces Component CountIntegrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error ReportingThermally Enhanced PackagesDAD (32-Pin HTSSOP Pad Up)DAP (32-Pin HTSSOP Pad Down)–40°C to 85°C Ambient Temperature Range
Description
AI
The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.
The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.
The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.
The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.
The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.
The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.