TPS6213013 Series
3V - 17V 3A AUTOMOTIVE Step-Down Converter In 3X3 QFN Package
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Package / Case | Qualification | Voltage - Output (Min/Fixed)▲▼ | Synchronous Rectifier▲▼ | Output Type▲▼ | Topology | Operating Temperature▲▼ | Operating Temperature▲▼ | Function | Mounting Type | Supplier Device Package | Voltage - Input (Min)▲▼ | Frequency - Switching▲▼ | Output Configuration | Number of Outputs▲▼ | Voltage - Input (Max)▲▼ | Current - Output▲▼ | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS6213013AQRGTRQ1Buck Switching Regulator IC Positive Fixed 1.3V 1 Output 3A 16-VFQFN Exposed Pad | 16-VFQFN Exposed Pad | AEC-Q100 | 1.2999999523162842 V | 27.030000686645508 °C/W | Buck | 125 °C | -40 °C | Step-Down | Surface Mount | 16-VQFN (3x3) | 3 V | 2500000 Hz | Positive | 1 ul | 17 V | 3 A | Automotive | |
Texas Instruments TPS6213013AQRGTTQ1Buck Switching Regulator IC Positive Fixed 1.3V 1 Output 3A 16-VFQFN Exposed Pad | 16-VFQFN Exposed Pad | AEC-Q100 | 1.2999999523162842 V | 27.030000686645508 °C/W | Buck | 125 °C | -40 °C | Step-Down | Surface Mount | 16-VQFN (3x3) | 3 V | 2500000 Hz | Positive | 1 ul | 17 V | 3 A | Automotive |
Key Features
• DCS-Control™ topologyQualified for automotive applicationsFunctional Safety-CapableDocumentation available to aid functional safety system designAEC-Q100 qualified with the following results:Device temperature grade: –40°C to 125°C operating junction temperature rangeDevice HBM ESD classification level 2Device CDM ESD classification level C4BInput voltage range: 3 to 17 VAdjustable output voltage from 0.9 to 6 VPin-selectable output voltage (nominal, + 5%)Programmable soft start and trackingSeamless power save mode transitionQuiescent current of 17 µA (typ.)Selectable operating frequencyPower good output100% Duty cycle modeShort circuit protectionOvertemperature protectionPin-to-pin compatible withTPS62150A-Q1Available in a 3-mm × 3-mm, VQFN-16 packageCreate a custom design using the TPS62130A-Q1 with theWEBENCH®Power DesignerDCS-Control™ topologyQualified for automotive applicationsFunctional Safety-CapableDocumentation available to aid functional safety system designAEC-Q100 qualified with the following results:Device temperature grade: –40°C to 125°C operating junction temperature rangeDevice HBM ESD classification level 2Device CDM ESD classification level C4BInput voltage range: 3 to 17 VAdjustable output voltage from 0.9 to 6 VPin-selectable output voltage (nominal, + 5%)Programmable soft start and trackingSeamless power save mode transitionQuiescent current of 17 µA (typ.)Selectable operating frequencyPower good output100% Duty cycle modeShort circuit protectionOvertemperature protectionPin-to-pin compatible withTPS62150A-Q1Available in a 3-mm × 3-mm, VQFN-16 packageCreate a custom design using the TPS62130A-Q1 with theWEBENCH®Power Designer
Description
AI
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).