Catalog(2 parts)
| Part | Capacitance - Input▲▼ | Current - Supply▲▼ | Supplier Device Package | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Output | Delay Time▲▼ | Mounting Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Channels▲▼ | Number of Channels▲▼ | Number of Channels▲▼ | Type | Data Rate (Max)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4.999999980020986e-12 F | 0.1120000034570694 A | 48-TSSOP | 0.006099999882280827 m | 48-TFSOP | 0.006095999851822853 m | MLVDS | 3.000000026176508e-9 s | Surface Mount | 3.5999999046325684 V | 3 V | -40 °C | 85 °C | 8 ul | 2 ul | 1 ul | Buffer, Multiplexer | 262144000 bit/s | |
4.999999980020986e-12 F | 0.1120000034570694 A | 48-TSSOP | 0.006099999882280827 m | 48-TFSOP | 0.006095999851822853 m | MLVDS | 3.000000026176508e-9 s | Surface Mount | 3.5999999046325684 V | 3 V | -40 °C | 85 °C | 8 ul | 2 ul | 1 ul | Buffer, Multiplexer | 262144000 bit/s |
Key Features
• LVTTL Receiver and Eight Line Drivers Configured as an 8-Port M-LVDS Repeater—SN65MLVD1282 LVTTL Receivers and Eight Line Drivers Configured as Dual 4-Port M-LVDS Repeaters—SN65MLVD129Drivers Meet or Exceed the M-LVDS Standard (TIA/EIA-899)Low-Voltage Differential 30-Line Drivers for Data Rates¹ Up to 250 Mbps or Clock Frequencies Up to 125 MHzPower Up/Down Glitch FreeControlled Driver Output Voltage Transition Times for Improved Signal QualityBus Pins High Impedance When Disabled or VCC≤ 1.5 VIndependent Enables for each DriverOutput-to-Ouput Skew tsk(o)≤ 160 psPart-to-Part Skew tsk(pp)≤ 800 psSingle 3.3-V Voltage SupplyBus Pin ESD Protection Exceeds 9 kVPackaged in 48-Pin TSSOP (DGG)APPLICATIONSAdvancedTCA™ (ATCA™) Clock Bus DriverClock DistributionData and Clock Repeating Over Backplanes and CablesCellular Base StationsCentral Office SwitchesNetwork Switches and Routers¹The data rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second).AdvancedTCA and ATCA are trademarks of the PCI Industrial Computer Manufacturers Group.LVTTL Receiver and Eight Line Drivers Configured as an 8-Port M-LVDS Repeater—SN65MLVD1282 LVTTL Receivers and Eight Line Drivers Configured as Dual 4-Port M-LVDS Repeaters—SN65MLVD129Drivers Meet or Exceed the M-LVDS Standard (TIA/EIA-899)Low-Voltage Differential 30-Line Drivers for Data Rates¹ Up to 250 Mbps or Clock Frequencies Up to 125 MHzPower Up/Down Glitch FreeControlled Driver Output Voltage Transition Times for Improved Signal QualityBus Pins High Impedance When Disabled or VCC≤ 1.5 VIndependent Enables for each DriverOutput-to-Ouput Skew tsk(o)≤ 160 psPart-to-Part Skew tsk(pp)≤ 800 psSingle 3.3-V Voltage SupplyBus Pin ESD Protection Exceeds 9 kVPackaged in 48-Pin TSSOP (DGG)APPLICATIONSAdvancedTCA™ (ATCA™) Clock Bus DriverClock DistributionData and Clock Repeating Over Backplanes and CablesCellular Base StationsCentral Office SwitchesNetwork Switches and Routers¹The data rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second).AdvancedTCA and ATCA are trademarks of the PCI Industrial Computer Manufacturers Group.
Description
AI
The SN65MLVD128 and SN65MLVD129 are LVTTL-to-M.LVDS translators/repeaters. Outputs comply with the M.LVDS standard (TIA/EIA-899) and are optimized for data rates up to 250 Mbps, and clock frequencies up to 125 MHz. The driver outputs have been designed to support multipoint buses presenting loads as low as 30and incorporates controlled transition times for backbone operation.
M-LVDS compliant devices allow for 32 nodes on a common bus, providing a high-speed replacement for RS-485 devices when lower common-mode voltage range and lower output signaling levels are acceptable. The SN65MLVD128 and SN65MLVD129 provide separate driver enables, allowing for independent control of each output signal.
Intended applications for these devices include transmission of clock signals from a central clock module, as well as translation and buffering of data or control signals for transmission through a controlled impedance backplane or cable.
The SN65MLVD128 and SN65MLVD129 are LVTTL-to-M.LVDS translators/repeaters. Outputs comply with the M.LVDS standard (TIA/EIA-899) and are optimized for data rates up to 250 Mbps, and clock frequencies up to 125 MHz. The driver outputs have been designed to support multipoint buses presenting loads as low as 30and incorporates controlled transition times for backbone operation.
M-LVDS compliant devices allow for 32 nodes on a common bus, providing a high-speed replacement for RS-485 devices when lower common-mode voltage range and lower output signaling levels are acceptable. The SN65MLVD128 and SN65MLVD129 provide separate driver enables, allowing for independent control of each output signal.
Intended applications for these devices include transmission of clock signals from a central clock module, as well as translation and buffering of data or control signals for transmission through a controlled impedance backplane or cable.