Catalog(8 parts)
| Part | Applications | Supplier Device Package | -3db Bandwidth▲▼ | Voltage - Supply, Single (V+)▲▼ | Voltage - Supply, Single (V+)▲▼ | Number of Channels▲▼ | Mounting Type | Multiplexer/Demultiplexer Circuit | Switch Circuit | Operating Temperature▲▼ | Operating Temperature▲▼ | Features | On-State Resistance (Max)▲▼ | Package / Case | Package / Case▲▼ | Package / Case▲▼ | Package / Case▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Networking | 16-SOIC | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-SOIC | 0.003911599982529879 m, 3.900000095367432 ul | |||
Networking | 16-SSOP | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-SSOP (0.154", 3.90mm Width) | ||||
Networking | 16-TSSOP | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-TSSOP | 0.004394200164824724 m | 0.004399999976158142 m | ||
Networking | 16-SOIC | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-SOIC | 0.003911599982529879 m, 3.900000095367432 ul | |||
Networking | 16-VQFN (4x3.5) | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-VFQFN Exposed Pad | ||||
Networking | 16-TSSOP | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-TSSOP | 0.004394200164824724 m | 0.004399999976158142 m | ||
Networking | 16-TVSOP | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-TFSOP | 0.004394200164824724 m, 0.004399999976158142 m | |||
Networking | 16-SOIC | 500000000 Hz | 3.5999999046325684 V | 3 V | 4 ul | Surface Mount | 2:1 | SPDT | 85 °C | -40 °C | 10/100 Base-T | 8 Ω | 16-SOIC | 0.003911599982529879 m, 3.900000095367432 ul |
Key Features
• Wide bandwidth (BW = 500 MHz typical)Low crosstalk (XTALK= –30 dB typical)Bidirectional data flow with near-zero propagation delayLow and flat ON-state resistance(ron= 4 Ω typical, ron(flat)= 1 Ω)Switching on Data I/O Ports (0 to 5 V)VCCOperating range from 3 V to 3.6 VIoffSupports partial power-down-mode operationData and control inputs have undershoot clamp diodesLatch-up performance exceeds 100 mA PerJESD 78, class IIESD Performance tested per JESD 222000-V Human-body model(A114-B, class II)1000-V Charged-device model (C101)Suitable for both 10 Base-T and 100 Base-T signalingWide bandwidth (BW = 500 MHz typical)Low crosstalk (XTALK= –30 dB typical)Bidirectional data flow with near-zero propagation delayLow and flat ON-state resistance(ron= 4 Ω typical, ron(flat)= 1 Ω)Switching on Data I/O Ports (0 to 5 V)VCCOperating range from 3 V to 3.6 VIoffSupports partial power-down-mode operationData and control inputs have undershoot clamp diodesLatch-up performance exceeds 100 mA PerJESD 78, class IIESD Performance tested per JESD 222000-V Human-body model(A114-B, class II)1000-V Charged-device model (C101)Suitable for both 10 Base-T and 100 Base-T signaling
Description
AI
The TS3L110 local area network (LAN) switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. WhenEis low, the switch is enabled, and the I port is connected to the Y port. WhenEis high, the switch is disabled, and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
The TS3L110 device can be used to replace mechanical relays in LAN applications. This device has low and flat ON-state resistance (ron), wide bandwidth, and low crosstalk, making it suitable for 10/100 Base-T and various other LAN applications. The TS3L110 device can be used to route signals from a 10/100 Base-T Ethernet transceiver to the RJ-45 LAN connectors in laptops or in docking stations. This device is designed for low channel-to-channel skew and low crosstalk.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current does not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down,Eshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The TS3L110 local area network (LAN) switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. WhenEis low, the switch is enabled, and the I port is connected to the Y port. WhenEis high, the switch is disabled, and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
The TS3L110 device can be used to replace mechanical relays in LAN applications. This device has low and flat ON-state resistance (ron), wide bandwidth, and low crosstalk, making it suitable for 10/100 Base-T and various other LAN applications. The TS3L110 device can be used to route signals from a 10/100 Base-T Ethernet transceiver to the RJ-45 LAN connectors in laptops or in docking stations. This device is designed for low channel-to-channel skew and low crosstalk.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current does not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down,Eshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.