TPS63050 Series
TPS6305x Single Inductor Buck-Boost with 1-A Switches and Adjustable Soft Start
Manufacturer: Texas Instruments
Catalog(3 parts)
| Part | Current - Output▲▼ | Frequency - Switching▲▼ | Voltage - Output▲▼ | Regulator Topology | Utilized IC / Part | Board Type | Supplied Contents | Voltage - Input▲▼ | Voltage - Input▲▼ | Main Purpose | Outputs and Type | Outputs and Type▲▼ | Voltage - Output (Max)▲▼ | Voltage - Input (Min)▲▼ | Supplier Device Package | Package / Case | Voltage - Input (Max)▲▼ | Output Configuration | Function | Output Type | Mounting Type | Voltage - Output (Min/Fixed)▲▼ | Topology | Operating Temperature▲▼ | Operating Temperature▲▼ | Synchronous Rectifier▲▼ | Number of Outputs▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS63050EVM-679TPS63050 - DC/DC, Step Up or Down 1, Non-Isolated Outputs Evaluation Board | 0.5 A | 2500000 Hz | 3.299999952316284 V | Buck-Boost | TPS63050 | Fully Populated | Board(s) | 2.5 V | 5.5 V | DC/DC, Step Up or Down | Non-Isolated | 1 ul | |||||||||||||||
Texas Instruments TPS63050EVM-180TPS63050 - DC/DC, Step Up or Down 1, Non-Isolated Outputs Evaluation Board | 0.5 A | 2500000 Hz | 3.299999952316284 V | Buck-Boost | TPS63050 | Fully Populated | Board(s) | 2.5 V | 5.5 V | DC/DC, Step Up or Down | Non-Isolated | 1 ul | |||||||||||||||
Texas Instruments TPS63050YFFTBuck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 500mA 12-UFBGA, DSBGA | 0.5 A | 2500000 Hz | 5.5 V | 2.5 V | 12-DSBGA | 12-UFBGA, DSBGA | 5.5 V | Positive | Step-Up/Step-Down | Adjustable | Surface Mount | 2.5 V | Buck-Boost | 85 °C | -40 °C | 1 ul |
Key Features
• Real buck or boost with seamless transition between buck and boost mode2.5 V to 5.5 V Input voltage range0.5-A Continuous output current: VIN≥ 2.5 V,VOUT= 3.3 VAdjustable and fixed output voltage versionEfficiency > 90% in boost mode and > 95% in buck mode2.5-MHz Typical switching frequencyAdjustable average input current limitAdjustable soft-start timeDevice quiescent current < 60 µAAutomatic power save mode or forced PWM modeLoad disconnect during shutdownOvertemperature protectionSmall 1.6mm x 1.2mm, 12-pin WCSP and 2.5mm x 2.5mm 12-pin HotRod™ QFN packageCreate a custom design using the:TPS63050 With theWEBENCH®Power DesignerTPS63051 With theWEBENCH®Power DesignerReal buck or boost with seamless transition between buck and boost mode2.5 V to 5.5 V Input voltage range0.5-A Continuous output current: VIN≥ 2.5 V,VOUT= 3.3 VAdjustable and fixed output voltage versionEfficiency > 90% in boost mode and > 95% in buck mode2.5-MHz Typical switching frequencyAdjustable average input current limitAdjustable soft-start timeDevice quiescent current < 60 µAAutomatic power save mode or forced PWM modeLoad disconnect during shutdownOvertemperature protectionSmall 1.6mm x 1.2mm, 12-pin WCSP and 2.5mm x 2.5mm 12-pin HotRod™ QFN packageCreate a custom design using the:TPS63050 With theWEBENCH®Power DesignerTPS63051 With theWEBENCH®Power Designer
Description
AI
The TPS6305x family of devices is a high efficiency, low quiescent-current buck-boost converter, suitable for applications where the input voltage is higher or lower than the output.
Continuous output current can go as high as 500 mA in boost mode and as high as 1 A in buck mode. The maximum average current in the switches is limited to a typical value of 1 A. The TPS6305x family of devices regulate the output voltage over the complete input voltage range by automatically switching between buck or boost mode depending on the input voltage, ensuring seamless transition between modes.
The buck-boost converter is based on a fixed-frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain the highest efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over the complete load current range.
The PFM/PWM pin allows the user to select between automatic-PFM/PWM mode operation and forced-PWM operation. During PWM mode a fixed-frequency of typically 2.5 MHz is used. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 12-pin DSBGA and in a 12-pin HotRod package.
The TPS6305x family of devices is a high efficiency, low quiescent-current buck-boost converter, suitable for applications where the input voltage is higher or lower than the output.
Continuous output current can go as high as 500 mA in boost mode and as high as 1 A in buck mode. The maximum average current in the switches is limited to a typical value of 1 A. The TPS6305x family of devices regulate the output voltage over the complete input voltage range by automatically switching between buck or boost mode depending on the input voltage, ensuring seamless transition between modes.
The buck-boost converter is based on a fixed-frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain the highest efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over the complete load current range.
The PFM/PWM pin allows the user to select between automatic-PFM/PWM mode operation and forced-PWM operation. During PWM mode a fixed-frequency of typically 2.5 MHz is used. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 12-pin DSBGA and in a 12-pin HotRod package.