CD74AC151 Series
8-Input Multiplexer
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
8-Input Multiplexer
| Part | Mounting Type | Circuit | Current - Output High, Low [custom] | Current - Output High, Low [custom] | Type | Voltage Supply Source | Independent Circuits | Supplier Device Package | Operating Temperature [Min] | Operating Temperature [Max] | Package / Case | Package / Case | Voltage - Supply [Min] | Voltage - Supply [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments CD74AC151M96 | Surface Mount | 1 x 8:1 | 24 mA | 24 mA | Multiplexer | Single Supply | 1 | 16-SOIC | -55 °C | 125 °C | 16-SOIC | 0.154 in, 3.9 mm Width | 1.5 V | 5.5 V |
Texas Instruments CD74AC151E | Through Hole | 1 x 8:1 | 24 mA | 24 mA | Multiplexer | Single Supply | 1 | 16-PDIP | -55 °C | 125 °C | 16-DIP | 0.3 in, 7.62 mm | 1.5 V | 5.5 V |
Key Features
• AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage8-line to 1-line multiplexers can perform as:Boolean function generatorsParallel-to-serial convertersData source selectorsSpeed of bipolar F, AS, and S, with significantly reduced power consumption balanced propagation delays±24mA output drive currentFanout to 15 F devicesSCR-latchup-resistant CMOS process and circuit designExceeds 2k V ESD protection per MIL-STD-883, method 3015AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage8-line to 1-line multiplexers can perform as:Boolean function generatorsParallel-to-serial convertersData source selectorsSpeed of bipolar F, AS, and S, with significantly reduced power consumption balanced propagation delays±24mA output drive currentFanout to 15 F devicesSCR-latchup-resistant CMOS process and circuit designExceeds 2k V ESD protection per MIL-STD-883, method 3015
Description
AI
This data selector/multiplexer provides full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low.
This data selector/multiplexer provides full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low.