TPS75501 Series
5-A, ultra-low-dropout voltage regulator with power good & enable
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
5-A, ultra-low-dropout voltage regulator with power good & enable
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Control Features | Protection Features | Package / Case | Voltage - Output (Max) [Max] | Supplier Device Package | Mounting Type | Voltage - Input (Max) [Max] | Output Type | Current - Quiescent (Iq) | PSRR | Current - Output | Number of Regulators | Output Configuration |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS75501KTTRG3 | 125 °C | -40 °C | Enable, Power Good | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5 V | TO-263 (DDPAK-5) | Surface Mount | 5.5 V | Adjustable | 200 µA | 60 dB | 5 A | 1 | Positive |
Texas Instruments TPS75501KTTTG3 | 125 °C | -40 °C | Enable, Power Good | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5 V | TO-263 (DDPAK-5) | Surface Mount | 5.5 V | Adjustable | 200 µA | 60 dB | 5 A | 1 | Positive |
Texas Instruments TPS75501KTTT | 125 °C | -40 °C | Enable, Power Good | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5 V | TO-263 (DDPAK-5) | Surface Mount | 5.5 V | Adjustable | 200 µA | 60 dB | 5 A | 1 | Positive |
Texas Instruments TPS75501KTTR | 125 °C | -40 °C | Enable, Power Good | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5 V | TO-263 (DDPAK-5) | Surface Mount | 5.5 V | Adjustable | 200 µA | 60 dB | 5 A | 1 | Positive |
Texas Instruments TPS75501KC | 125 °C | -40 °C | Enable, Power Good | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | TO-220-5 | 5 V | TO-220-5 | Through Hole | 5.5 V | Adjustable | 200 µA | 60 dB | 5 A | 1 | Positive |
Key Features
• 5-A Low-Dropout Voltage RegulatorAvailable in 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed-Output and Adjustable VersionsOpen Drain Power-Good (PG\) Status Output (Fixed Options Only)Dropout Voltage Typically 250 mV at 5 A (TPS75533)Low 125 uA Typical Quiescent CurrentFast Transient Response3% Tolerance Over Specified Conditions for Fixed-Output VersionsAvailable in 5-Pin TO\x96220 and TO\x96263 Surface-Mount PackagesThermal Shutdown Protection5-A Low-Dropout Voltage RegulatorAvailable in 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed-Output and Adjustable VersionsOpen Drain Power-Good (PG\) Status Output (Fixed Options Only)Dropout Voltage Typically 250 mV at 5 A (TPS75533)Low 125 uA Typical Quiescent CurrentFast Transient Response3% Tolerance Over Specified Conditions for Fixed-Output VersionsAvailable in 5-Pin TO\x96220 and TO\x96263 Surface-Mount PackagesThermal Shutdown Protection
Description
AI
The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG\) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops down to less than 1 uA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 250 mV at an output current of 5 A for the TPS75533) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 uA over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to less than 1 uA at TJ= 25°C. The power-good terminal (PG\) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS755xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS755xx family is available in a 5-pin TO\x96220 (KC) and TO\x96263 (KTT) packages.
The TPS755xx family of 5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG\) and an adjustable voltage option regulator. These devices are capable of supplying 5 A of output current with a dropout of 250 mV (TPS75533). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops down to less than 1 uA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 250 mV at an output current of 5 A for the TPS75533) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 uA over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to less than 1 uA at TJ= 25°C. The power-good terminal (PG\) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS755xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS755xx family is available in a 5-pin TO\x96220 (KC) and TO\x96263 (KTT) packages.