Zenode.ai Logo

TPS2020 Series

Automotive 0.2A loading, 2.7-5.5V, 33mΩ USB power switch, active-low

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

Automotive 0.2A loading, 2.7-5.5V, 33mΩ USB power switch, active-low

PartRds On (Typ)Output ConfigurationNumber of OutputsOutput TypeVoltage - Load [Max]Voltage - Load [Min]Ratio - Input:Output [custom]Fault ProtectionPackage / CasePackage / CasePackage / CaseFeaturesInterfaceMounting TypeOperating Temperature [Max]Operating Temperature [Min]Input TypeCurrent - Output (Max) [Max]Switch TypeSupplier Device PackageVoltage - Supply (Vcc/Vdd)GradeQualificationSecondary AttributesEmbeddedSupplied ContentsFunctionPrimary Attributes [Max]Primary Attributes [Min]TypeUtilized IC / Part
Texas Instruments
TPS2020P
33 mOhm
High Side
1
N-Channel
5.5 V
2.7 V
1:1
Current Limiting (Fixed), Over Temperature, UVLO
8-DIP
0.3 in
7.62 mm
Status Flag
On/Off
Through Hole
125 ¯C
-40 °C
Inverting
200 mA
General Purpose
8-PDIP
Not Required
Texas Instruments
TPS2020IDRQ1
33 mOhm
High Side
1
N-Channel
5.5 V
2.7 V
1:1
Current Limiting (Fixed), Over Temperature, UVLO
8-SOIC
3.9 mm
Status Flag
On/Off
Surface Mount
125 ¯C
-40 °C
Inverting
200 mA
General Purpose
8-SOIC
Not Required
Automotive
AEC-Q100
Texas Instruments
TPS2020EVM-290
Overvoltage, Short-Circuit, Thermal, Undervoltage Protection
Board(s)
Power Distribution Switch (Load Switch)
5.5 V
2.7 V
Power Management
TPS2020
Texas Instruments
TPS2020DR
33 mOhm
High Side
1
N-Channel
5.5 V
2.7 V
1:1
Current Limiting (Fixed), Over Temperature, UVLO
8-SOIC
3.9 mm
Status Flag
On/Off
Surface Mount
125 ¯C
-40 °C
Inverting
200 mA
General Purpose
8-SOIC
Not Required
Texas Instruments
TPS2020PG4
33 mOhm
High Side
1
N-Channel
5.5 V
2.7 V
1:1
Current Limiting (Fixed), Over Temperature, UVLO
8-DIP
0.3 in
7.62 mm
Status Flag
On/Off
Through Hole
125 ¯C
-40 °C
Inverting
200 mA
General Purpose
8-PDIP
Not Required

Key Features

Qualified for Automotive Applications33-m(5-V Input) High-Side MOSFET SwitchShort-Circuit and Thermal ProtectionOvercurrent Logic OutputOperating Range: 2.7 V to 5.5 VLogic-Level Enable InputTypical Rise Time: 6.1 msUndervoltage LockoutMaximum Standby Supply Current: 10 µANo Drain-Source Back-Gate DiodeAvailable in 8-Pin SOIC PackageAmbient Temperature Range: –40°C to 85°CESD Protection: 2-kV Human-Body Model, 200-V Machine ModelUL Listed - File No. E169910Qualified for Automotive Applications33-m(5-V Input) High-Side MOSFET SwitchShort-Circuit and Thermal ProtectionOvercurrent Logic OutputOperating Range: 2.7 V to 5.5 VLogic-Level Enable InputTypical Rise Time: 6.1 msUndervoltage LockoutMaximum Standby Supply Current: 10 µANo Drain-Source Back-Gate DiodeAvailable in 8-Pin SOIC PackageAmbient Temperature Range: –40°C to 85°CESD Protection: 2-kV Human-Body Model, 200-V Machine ModelUL Listed - File No. E169910

Description

AI
The TPS202x family of power distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices are 50-mN-channel MOSFET high-side power switches. The switch is controlled by a logic enable compatible with 5-V logic and 3-V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short is present, the TPS202x limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OC) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until valid input voltage is present. The TPS202x devices differ only in short-circuit current threshold. The TPS2020 limits at 0.3-A load, the TPS2021 at 0.9-A load, the TPS2022 at 1.5-A load, and the TPS2024 at 3-A load. The TPS202x is available in an 8-pin small-outline integrated-circuit (SOIC) package and operates over a junction temperature range of –40°C to 125°C. The TPS202x family of power distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices are 50-mN-channel MOSFET high-side power switches. The switch is controlled by a logic enable compatible with 5-V logic and 3-V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short is present, the TPS202x limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OC) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until valid input voltage is present. The TPS202x devices differ only in short-circuit current threshold. The TPS2020 limits at 0.3-A load, the TPS2021 at 0.9-A load, the TPS2022 at 1.5-A load, and the TPS2024 at 3-A load. The TPS202x is available in an 8-pin small-outline integrated-circuit (SOIC) package and operates over a junction temperature range of –40°C to 125°C.