Zenode.ai Logo
Log InSign Up

DRV8801 Series

40-V, 2.8-A H-bridge motor driver with current feedback

Manufacturer: Texas Instruments

Catalog(7 parts)

PartVoltage - Supply▲▼Voltage - Supply▲▼ApplicationsCurrent - Output▲▼FunctionOperating Temperature▲▼Operating Temperature▲▼InterfaceVoltage - Load▲▼Voltage - Load▲▼Mounting TypeSupplier Device PackageTechnologyMotor Type - StepperMotor Type - AC, DCPackage / Case▲▼Package / CasePackage / Case▲▼Output ConfigurationGradeQualificationEmbedded▲▼Supplied ContentsUtilized IC / PartPrimary AttributesContentsTypeSecondary Attributes
Texas Instruments
DRV8801PWPR
Bipolar Motor Driver DMOS Parallel 16-HTSSOP
8 V
38 V
General Purpose
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
8 V
38 V
Surface Mount
16-HTSSOP
DMOS
Bipolar
Brushed DC
0.004399999976158142 m
16-PowerTSSOP
0.004394200164824724 m
Half Bridge (2)
Texas Instruments
DRV8801RTYR
Bipolar Motor Driver DMOS Parallel 16-QFN (4x4)
8 V
38 V
General Purpose
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
8 V
38 V
Surface Mount
16-QFN (4x4)
DMOS
Bipolar
Brushed DC
16-WQFN Exposed Pad
Half Bridge (2)
Texas Instruments
DRV8801QRTYRQ1
Bipolar Motor Driver DMOS Parallel 16-QFN (4x4)
8 V
38 V
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
8 V
38 V
Surface Mount
16-QFN (4x4)
DMOS
Bipolar
Brushed DC
16-WQFN Exposed Pad
Half Bridge (2)
Automotive
AEC-Q100
Texas Instruments
DRV8801RTYT
Bipolar Motor Driver DMOS Parallel 16-QFN (4x4)
8 V
38 V
General Purpose
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
8 V
38 V
Surface Mount
16-QFN (4x4)
DMOS
Bipolar
Brushed DC
16-WQFN Exposed Pad
Half Bridge (2)
Texas Instruments
DRV8801EVM
DRV8800, DRV8801 Motor Controller/Driver Power Management Evaluation Board
Motor Controller/Driver
Board(s)
DRV8800, DRV8801
Diagnostic Output, Synchronous Rectification
Board(s)
Power Management
Internal Under Voltage Lockout (UVLO), Over Current and Crossover-Current Protection
Texas Instruments
DRV8801PWP
Bipolar Motor Driver DMOS Parallel 16-HTSSOP
8 V
38 V
General Purpose
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
8 V
38 V
Surface Mount
16-HTSSOP
DMOS
Bipolar
Brushed DC
0.004399999976158142 m
16-PowerTSSOP
0.004394200164824724 m
Half Bridge (2)
Texas Instruments
DRV8801AQRMJRQ1
Bipolar Motor Driver DMOS Parallel 16-WQFN (4x4)
6.5 V
36 V
2.799999952316284 A
Driver - Fully Integrated, Control and Power Stage
150 °C
-40 °C
Parallel
6.5 V
36 V
Surface Mount, Wettable Flank
16-WQFN (4x4)
DMOS
Bipolar
Brushed DC
16-WQFN Exposed Pad
Half Bridge (2)
Automotive
AEC-Q100

Key Features

• H-Bridge Motor DriverLow RDS(on)MOSFETs (0.4-Ω Typical)Low-Power Sleep Mode100% PWM Duty Cycle Supported8-V to 36-V Operating Supply Voltage RangeThermally Enhanced Surface-Mount PackageProtection Features:VBB Undervoltage Lockout (UVLO)Charge Pump Undervoltage (CPUV)Overcurrent Protection (OCP)Short-to-Supply ProtectionShort-to-Ground ProtectionOvertemperature Warning (OTW)Overtemperature Shutdown (OTS)Fault Condition Indication Pin (nFAULT)H-Bridge Motor DriverLow RDS(on)MOSFETs (0.4-Ω Typical)Low-Power Sleep Mode100% PWM Duty Cycle Supported8-V to 36-V Operating Supply Voltage RangeThermally Enhanced Surface-Mount PackageProtection Features:VBB Undervoltage Lockout (UVLO)Charge Pump Undervoltage (CPUV)Overcurrent Protection (OCP)Short-to-Supply ProtectionShort-to-Ground ProtectionOvertemperature Warning (OTW)Overtemperature Shutdown (OTS)Fault Condition Indication Pin (nFAULT)

Description

AI
The DRV880x provides a versatile motor driver solution with a variety of capabilities. The device contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor, or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880x is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates the needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for undervoltage, charge pump fault, overcurrent, short-to-supply, short-to-ground, and overtemperature. Fault conditions are indicated through the nFAULT pin. The DRV880x is packaged in a 16-pin WQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br). The DRV880x provides a versatile motor driver solution with a variety of capabilities. The device contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor, or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880x is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates the needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for undervoltage, charge pump fault, overcurrent, short-to-supply, short-to-ground, and overtemperature. Fault conditions are indicated through the nFAULT pin. The DRV880x is packaged in a 16-pin WQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).