TPS2829 Series

2-A/2-A single-channel gate driver wih 40-V VDD

Catalog(4 parts)

Part	Gate Type	Input Type	Driven Configuration	Logic Voltage - VIL, VIH▲▼	Logic Voltage - VIL, VIH▲▼	Number of Drivers▲▼	Grade	Voltage - Supply▲▼	Voltage - Supply▲▼	Mounting Type	Channel Type	Operating Temperature▲▼	Operating Temperature▲▼	Supplier Device Package	Qualification	Package / Case	Current - Peak Output (Source, Sink)▲▼	Current - Peak Output (Source, Sink)▲▼	Rise / Fall Time (Typ)▲▼	Rise / Fall Time (Typ)▲▼
Texas Instruments TPS2829QDBVRQ1 Low-Side Gate Driver IC Non-Inverting SOT-23-5	MOSFET (N-Channel), N-Channel MOSFET	Non-Inverting	Low-Side	1 V	4 V	1 ul	Automotive	14 V	4 V	Surface Mount	Single	150 °C	-40 °C	SOT-23-5	AEC-Q100	SC-74A, SOT-753	2 A	2 A	1.4000000270186774e-8 s	1.4000000270186774e-8 s
Texas Instruments TPS2829DBVRG4 Low-Side Gate Driver IC Non-Inverting SOT-23-5	N-Channel MOSFET	Non-Inverting	Low-Side	1 V	4 V	1 ul		14 V	4 V	Surface Mount	Single	125 °C	-40 °C	SOT-23-5		SC-74A, SOT-753	2 A	2 A	1.4000000270186774e-8 s	1.4000000270186774e-8 s
Texas Instruments TPS2829DBVT Low-Side Gate Driver IC Non-Inverting SOT-23-5	N-Channel MOSFET	Non-Inverting	Low-Side	1 V	4 V	1 ul		14 V	4 V	Surface Mount	Single	125 °C	-40 °C	SOT-23-5		SC-74A, SOT-753	2 A	2 A	1.4000000270186774e-8 s	1.4000000270186774e-8 s
Texas Instruments TPS2829DBVTG4 Low-Side Gate Driver IC Non-Inverting SOT-23-5	N-Channel MOSFET	Non-Inverting	Low-Side	1 V	4 V	1 ul		14 V	4 V	Surface Mount	Single	125 °C	-40 °C	SOT-23-5		SC-74A, SOT-753	2 A	2 A	1.4000000270186774e-8 s	1.4000000270186774e-8 s

Key Features

• Low-Cost Single-Channel High-Speed MOSFET DriverICC...15-uA Max (TPS2828, TPS2829)25-ns Max Rise/Fall Times and 40-ns Max Propagation Delay ...1-nF Load2-A Peak Output Current4-V to 14-V Driver Supply Voltage Range; Internal Regulator Extends Range to 40 V (TPS2816, TPS2817, TPS2818, TPS2819)5-pin SOT-23 Package–40°C to 125°C Ambient-Temperature Operating RangeHighly Resistant to Latch-upsLow-Cost Single-Channel High-Speed MOSFET DriverICC...15-uA Max (TPS2828, TPS2829)25-ns Max Rise/Fall Times and 40-ns Max Propagation Delay ...1-nF Load2-A Peak Output Current4-V to 14-V Driver Supply Voltage Range; Internal Regulator Extends Range to 40 V (TPS2816, TPS2817, TPS2818, TPS2819)5-pin SOT-23 Package–40°C to 125°C Ambient-Temperature Operating RangeHighly Resistant to Latch-ups

Description

The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C. The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C.