TLV9051 Series
Single, 5.5-V, 5-MHz, 15-V/μs slew rate, RRIO operational amplifier for cost-optimized applications
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Voltage - Supply, Single/Dual (±)▲▼ | Voltage - Supply, Single/Dual (±)▲▼ | Current - Output / Channel▲▼ | Slew Rate▲▼ | Contents | Channels per IC▲▼ | Amplifier Type | Output Type | Gain Bandwidth Product▲▼ | Current - Supply (Main IC)▲▼ | Utilized IC / Part |
|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLV9051DPWEVMTLV9051 - 1 - Single Channels per IC General Purpose Amplifier Evaluation Board | 5.5 V | 1.7999999523162842 V | 0.05000000074505806 A | 15000000 V/s | Partially Populated Board(s) | 1 ul | General Purpose | Rail-to-Rail, Single-Ended | 5000000 Hz | 0.00033000000985339284 A | TLV9051 |
Key Features
• High slew rate: 15V/µsLow quiescent current: 330µARail-to-rail input and outputLow input offset voltage: ±0.33mVUnity-gain bandwidth: 5MHzLow broadband noise: 15nV/√ HzLow input bias current: 2pAUnity-gain stableInternal RFI and EMI filterScalable family of CMOS op amps for low-cost applicationsOperational at supply voltages as low as 1.8VExtended temperature range: –40°C to 125°CHigh slew rate: 15V/µsLow quiescent current: 330µARail-to-rail input and outputLow input offset voltage: ±0.33mVUnity-gain bandwidth: 5MHzLow broadband noise: 15nV/√ HzLow input bias current: 2pAUnity-gain stableInternal RFI and EMI filterScalable family of CMOS op amps for low-cost applicationsOperational at supply voltages as low as 1.8VExtended temperature range: –40°C to 125°C
Description
AI
The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8V to 6.0V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for cost-constrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads.
The TLV905xS devices include a shutdown mode that allow the amplifiers to be switched off into a standby mode with typical current consumption less than 1µA.
The TLV905x family is easy to use due to the devices being unity-gain stable, including a RFI and EMI filter, and being free from phase reversal in an overdrive condition.
The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8V to 6.0V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for cost-constrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads.
The TLV905xS devices include a shutdown mode that allow the amplifiers to be switched off into a standby mode with typical current consumption less than 1µA.
The TLV905x family is easy to use due to the devices being unity-gain stable, including a RFI and EMI filter, and being free from phase reversal in an overdrive condition.