Catalog(1 parts)
| Part | Current - Output High, Low▲▼ | Mounting Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Package / Case▲▼ | Package / Case▲▼ | Package / Case | Number of Bits per Element▲▼ | Supplier Device Package | Output Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Elements▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments SN74ABT16863DLTransceiver, Non-Inverting 2 Element 9 Bit per Element 3-State Output 56-SSOP | 0.03200000151991844 A, 0.06400000303983688 A | Surface Mount | 5.5 V | 4.5 V | 0.007493000011891127 m | 0.007499999832361937 m | 56-BSSOP | 9 ul | 56-SSOP | 3-State | 85 °C | -40 °C | 2 ul |
Key Features
• Members of the Texas InstrumentsWidebusTMFamilyState-of-the-ArtEPIC-IIBTMBiCMOS Design Significantly Reduces Power DissipationLatch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17Typical VOLP(Output Ground Bounce) < 1 V at VCC= 5 V, TA= 25°CHigh-Impedance State During Power Up and Power DownDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutHigh-Drive Outputs (-32-mA IOH, 64-mA IOL)Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Package and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus and EPIC-IIB are trademarks of Texas Instruments Incorporated.Members of the Texas InstrumentsWidebusTMFamilyState-of-the-ArtEPIC-IIBTMBiCMOS Design Significantly Reduces Power DissipationLatch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17Typical VOLP(Output Ground Bounce) < 1 V at VCC= 5 V, TA= 25°CHigh-Impedance State During Power Up and Power DownDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutHigh-Drive Outputs (-32-mA IOH, 64-mA IOL)Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Package and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus and EPIC-IIB are trademarks of Texas Instruments Incorporated.
Description
AI
The 'ABT16863 are 18-bit noninverting transceivers designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements.
The 'ABT16863 can be used as two 9-bit transceivers or one 18-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the output-enable (OEAB\ or OEBA\) inputs.
When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT16863 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16863 is characterized for operation from -40°C to 85°C.
The 'ABT16863 are 18-bit noninverting transceivers designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements.
The 'ABT16863 can be used as two 9-bit transceivers or one 18-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the output-enable (OEAB\ or OEBA\) inputs.
When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT16863 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16863 is characterized for operation from -40°C to 85°C.