Catalog(2 parts)
| Part | Operating Temperature▲▼ | Operating Temperature▲▼ | Supplier Device Package | Package / Case | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Protocol | Data Rate▲▼ | Duplex | Mounting Type | Type | Receiver Hysteresis▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
-40 °C | 85 °C | 10-VSSOP | 10-MSOP, 10-TFSOP | 5.5 V | 4.5 V | RS422, RS485 | 204800 bit/s | Full | Surface Mount | Transceiver | 0.029999999329447743 V | |
-40 °C | 85 °C | 10-VSSOP | 10-MSOP, 10-TFSOP | 5.5 V | 4.5 V | RS422, RS485 | 204800 bit/s | Full | Surface Mount | Transceiver | 0.029999999329447743 V |
Key Features
• Low quiescent power375 µA (Typical) Enabled mode2 nA (Typical) Shutdown modeSmall MSOP package1/8 Unit-Load—Up to 256 nodes per bus16 kV Bus-pin ESD protection, 6 kV all pinsFailsafe receiver (bus open, short, idle)TIA/EIA-485A Standard compliantRS-422 CompatiblePower-up, power-down glitch-free operationLow quiescent power375 µA (Typical) Enabled mode2 nA (Typical) Shutdown modeSmall MSOP package1/8 Unit-Load—Up to 256 nodes per bus16 kV Bus-pin ESD protection, 6 kV all pinsFailsafe receiver (bus open, short, idle)TIA/EIA-485A Standard compliantRS-422 CompatiblePower-up, power-down glitch-free operation
Description
AI
Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus networks. Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard.
With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps.
The devices are designed to operate with a low supply current, less than 1 mA (typical), exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal for power-sensitive applications.
The wide common-mode range and high ESD protection levels of these devices make them suitable for demanding applications such as motion controllers, electrical inverters, industrial networks, and cabled chassis interconnects where noise tolerance is essential.
These devices are characterized for operation over the temperature range -40°C to 85°C
Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus networks. Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard.
With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps.
The devices are designed to operate with a low supply current, less than 1 mA (typical), exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal for power-sensitive applications.
The wide common-mode range and high ESD protection levels of these devices make them suitable for demanding applications such as motion controllers, electrical inverters, industrial networks, and cabled chassis interconnects where noise tolerance is essential.
These devices are characterized for operation over the temperature range -40°C to 85°C