TUSB213 Series
Automotive USB 2.0 high speed signal conditioner with DC boost
Manufacturer: Texas Instruments
Catalog(7 parts)
| Part | Applications | Interface | Mounting Type | Package / Case | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Supplier Device Package | Grade | Qualification | Secondary Attributes | Embedded | Embedded▲▼ | Type | Supplied Contents | Utilized IC / Part | Function | Operating Temperature▲▼ | Operating Temperature▲▼ | Current - Supply▲▼ | Standards | Protocol |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Signal Processing | USB | Surface Mount | 14-VFQFN Exposed Pad | 5.5 V | 4.400000095367432 V | 14-VQFN (3.5x3.5) | |||||||||||||||
Signal Processing | USB | Surface Mount | 14-VFQFN Exposed Pad | 5.5 V | 4.400000095367432 V | 14-VQFN (3.5x3.5) | Automotive | AEC-Q100 | |||||||||||||
On-Board LEDs | 8-Bit, MCU | Interface | Board(s) | TPS2149, TUSB2136 | USB | ||||||||||||||||
Signal Processing | USB | Surface Mount | 14-VFQFN Exposed Pad | 5.5 V | 4.400000095367432 V | 14-VQFN (3.5x3.5) | |||||||||||||||
USB | 64-LQFP | 3.5999999046325684 V | 3 V | 64-LQFP (10x10) | Hub Controller | 70 °C | 0 °C | 0.02500000037252903 A | USB 2.0 | USB | |||||||||||
Signal Processing | USB | Surface Mount | 14-VFQFN Exposed Pad | 5.5 V | 4.400000095367432 V | 14-VQFN (3.5x3.5) | Automotive | AEC-Q100 | |||||||||||||
Signal Processing | USB | Surface Mount | 14-VFQFN Exposed Pad | 5.5 V | 4.400000095367432 V | 14-VQFN (3.5x3.5) |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified with the Following ResultsDevice Temperature Grade 2: –40°C to 105°C Ambient Operating TemperatureDevice HBM Classification Level H1CDevice CDM Classification Level C3Compatible with USB 2.0, OTG 2.0 and BC 1.2Pin strap or I2C ConfigurableSupport for LS, FS, HS signalingUltra-low USB Disconnect and Shutdown Power ConsumptionScalable solution - Daisy Chain Device for High Loss ApplicationsD1P/M and D2P/M Interchangeable and Host/Device AgnosticSupports up to 5m pre-channel or 2m post-channel Cable LengthFour Selectable AC Boost Setting Via External Pulldown ResistorDC Boost Along With AC Boost for Best Signal IntegrityQualified for Automotive ApplicationsAEC-Q100 Qualified with the Following ResultsDevice Temperature Grade 2: –40°C to 105°C Ambient Operating TemperatureDevice HBM Classification Level H1CDevice CDM Classification Level C3Compatible with USB 2.0, OTG 2.0 and BC 1.2Pin strap or I2C ConfigurableSupport for LS, FS, HS signalingUltra-low USB Disconnect and Shutdown Power ConsumptionScalable solution - Daisy Chain Device for High Loss ApplicationsD1P/M and D2P/M Interchangeable and Host/Device AgnosticSupports up to 5m pre-channel or 2m post-channel Cable LengthFour Selectable AC Boost Setting Via External Pulldown ResistorDC Boost Along With AC Boost for Best Signal Integrity
Description
AI
The TUSB213-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel which helps passing USB electrical compliance tests.
TUSB213-Q1 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB213-Q1 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector, this allows use in many different applications.
In addition, TUSB213-Q1 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
The TUSB213-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel which helps passing USB electrical compliance tests.
TUSB213-Q1 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB213-Q1 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector, this allows use in many different applications.
In addition, TUSB213-Q1 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.