BQ24272 Series
2.5A, Singe Input, Single Cell Switchmode Li-Ion BATTERY CHARGER with Power Path Management
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
2.5A, Singe Input, Single Cell Switchmode Li-Ion BATTERY CHARGER with Power Path Management
| Part | Charge Current - Max [Max] | Package / Case | Number of Cells | Voltage - Supply (Max) [Max] | Current - Charging | Battery Pack Voltage | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Battery Chemistry | Interface | Fault Protection | Mounting Type | Supplied Contents | Type | Utilized IC / Part | Primary Attributes | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments BQ24272RGER | 2 A | 24-VFQFN Exposed Pad | 1 | 10 V | Constant - Programmable | 3.7 V | 85 °C | -40 °C | 24-VQFN (4x4) | Lithium Ion | I2C | Over Temperature, Over Voltage, Short Circuit | Surface Mount | |||||
Texas Instruments BQ24272YFFT | 2 A | 49-UFBGA, DSBGA | 1 | 10 V | Constant - Programmable | 3.7 V | 85 °C | -40 °C | 49-DSBGA (2.8x2.8) | Lithium Ion | I2C | Over Temperature, Over Voltage, Short Circuit | Surface Mount | |||||
Texas Instruments BQ24272YFFR | 2 A | 49-UFBGA, DSBGA | 1 | 10 V | Constant - Programmable | 3.7 V | 85 °C | -40 °C | 49-DSBGA (2.8x2.8) | Lithium Ion | I2C | Over Temperature, Over Voltage, Short Circuit | Surface Mount | |||||
Texas Instruments BQ24272EVM-759 | Board(s) | Power Management | BQ24272 | Li-Ion (1 Cell) | Battery Charger |
Key Features
• High-Efficiency Switch Mode Charger with Separate Power Path ControlInstantly Startup System from a Deeply Discharged Battery or No Battery20V input rating, with 10.5V Over-Voltage Protection (OVP)Integrated FETs for Up to 2.5A Charge RateHighly Integrated Battery N-Channel MOSFET Controller for Power Path ManagementSafe and Accurate Battery Management Functions0.5% Battery Regulation Accuracy10% Charge Current AccuracyVoltage-based, NTC Monitoring Input (TS)JEITA CompatibleThermal Regulation Protection for Output Current ControlBAT Short-Circuit ProtectionSoft-Start Feature to Reduce Inrush CurrentThermal Shutdown and ProtectionAvailable in Small 49-ball WCSP or QFN-24 PackagesHigh-Efficiency Switch Mode Charger with Separate Power Path ControlInstantly Startup System from a Deeply Discharged Battery or No Battery20V input rating, with 10.5V Over-Voltage Protection (OVP)Integrated FETs for Up to 2.5A Charge RateHighly Integrated Battery N-Channel MOSFET Controller for Power Path ManagementSafe and Accurate Battery Management Functions0.5% Battery Regulation Accuracy10% Charge Current AccuracyVoltage-based, NTC Monitoring Input (TS)JEITA CompatibleThermal Regulation Protection for Output Current ControlBAT Short-Circuit ProtectionSoft-Start Feature to Reduce Inrush CurrentThermal Shutdown and ProtectionAvailable in Small 49-ball WCSP or QFN-24 Packages
Description
AI
The bq24272 is a highly integrated single cell Li-Ion battery charger and system power path management device targeted for space-limited, portable applications with high capacity batteries. The single cell charger operates from a dedicated power source such as a wall adapter or wireless power supply for a versatile solution.
The power path management feature allows the bq24272 to power the system from a high efficiency DC to DC converter while simultaneously and independently charging the battery. The charger monitors the battery current at all times and reduces the charge current when the system load requires current above the input current limit. This allows for proper charge termination and timer operation. The system voltage is regulated to the battery voltage but will not drop below 3.5V. This minimum system voltage support enables the system to run with a defective or absent battery pack and enables instant system turn-on even with a totally discharged battery or no battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents. This enables the use of a smaller adapter.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. Additionally, the bq24272 offers a voltage-based battery pack thermistor monitoring input (TS) that monitors battery temperature for safe charging.
The bq24272 is a highly integrated single cell Li-Ion battery charger and system power path management device targeted for space-limited, portable applications with high capacity batteries. The single cell charger operates from a dedicated power source such as a wall adapter or wireless power supply for a versatile solution.
The power path management feature allows the bq24272 to power the system from a high efficiency DC to DC converter while simultaneously and independently charging the battery. The charger monitors the battery current at all times and reduces the charge current when the system load requires current above the input current limit. This allows for proper charge termination and timer operation. The system voltage is regulated to the battery voltage but will not drop below 3.5V. This minimum system voltage support enables the system to run with a defective or absent battery pack and enables instant system turn-on even with a totally discharged battery or no battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents. This enables the use of a smaller adapter.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. Additionally, the bq24272 offers a voltage-based battery pack thermistor monitoring input (TS) that monitors battery temperature for safe charging.