CD74HCT4067-Q1 Series
Automotive, 5V, 16:1, single channel analog multiplexer with TTL inputs
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive, 5V, 16:1, single channel analog multiplexer with TTL inputs
| Part | Multiplexer/Demultiplexer Circuit | Channel Capacitance (CS(off), CD(off)) [custom] | Channel Capacitance (CS(off), CD(off)) [custom] | Supplier Device Package | Qualification | Channel-to-Channel Matching (ΔRon) | Switch Time (Ton, Toff) (Max) [custom] | Switch Time (Ton, Toff) (Max) [custom] | On-State Resistance (Max) [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Number of Circuits | -3db Bandwidth | Voltage - Supply, Single (V+) [Min] | Voltage - Supply, Single (V+) [Max] | Grade | Package / Case [y] | Package / Case [x] | Package / Case | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments D24067IM96G4Q1 | 16:1 | 50 pF | 5 pF | 24-SOIC | AEC-Q100 | 10 Ohm | 55 ns | 60 ns | 180 Ohms | 85 °C | -40 °C | 1 | 89 MHz | 4.5 V | 5.5 V | Automotive | 7.5 mm | 0.295 in | 24-SOIC | Surface Mount |
Key Features
• Qualified for automotive applicationsAEC-Q100 test guidance with the following results:Device temperature grade 1: –40°C to 125°C ambient operating temperature rangeDevice HBM ESD Classification Level H1ADevice CDM ESD Classification Level C2Wide analog input voltage rangeLow ON resistance70Ω typical (VCC = 4.5V)Fast switching and propagation speedsBreak-before-make switching6ns typical (VCC = 4.5V)Fanout (over temperature range)Standard outputs: 10 LSTTL loadsBus driver outputs: 15 LSTTL loadsBalanced propagation delay and transition timesSignificant power reduction compared to LSTTL logic ICs4.5V to 5.5V operationDirect LSTTL input logic compatibility: VIL = 0.8V maximum, VIH = 2V minimumCMOS input compatibility: II ≤ 1µA at VOL, VOHQualified for automotive applicationsAEC-Q100 test guidance with the following results:Device temperature grade 1: –40°C to 125°C ambient operating temperature rangeDevice HBM ESD Classification Level H1ADevice CDM ESD Classification Level C2Wide analog input voltage rangeLow ON resistance70Ω typical (VCC = 4.5V)Fast switching and propagation speedsBreak-before-make switching6ns typical (VCC = 4.5V)Fanout (over temperature range)Standard outputs: 10 LSTTL loadsBus driver outputs: 15 LSTTL loadsBalanced propagation delay and transition timesSignificant power reduction compared to LSTTL logic ICs4.5V to 5.5V operationDirect LSTTL input logic compatibility: VIL = 0.8V maximum, VIH = 2V minimumCMOS input compatibility: II ≤ 1µA at VOL, VOH
Description
AI
The CD74HCx4067-Q1 device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated circuits.
This analog multiplexer and demultiplexer controls analog voltages that may vary across the voltage supply range. It is a bidirectional switch, thus allowing any analog input to be used as an output and vice-versa. The switch has low (on) resistance and low (off) leakages. In addition, the device has an enable control that, when high, disables all switches to their off state.
The CD74HCx4067-Q1 device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated circuits.
This analog multiplexer and demultiplexer controls analog voltages that may vary across the voltage supply range. It is a bidirectional switch, thus allowing any analog input to be used as an output and vice-versa. The switch has low (on) resistance and low (off) leakages. In addition, the device has an enable control that, when high, disables all switches to their off state.